A critical review on the variations in anodization parameters toward microstructural formation of TiO2 nanotubes
Over the past couple of decades (2001–2020), titania (TiO2) nanotubes (NTs) have been
prepared by anodization techniques. The architecture of TiO2 NTs is predominantly …
prepared by anodization techniques. The architecture of TiO2 NTs is predominantly …
Double-sided semitransparent titania photoelectrode with enhanced light harvesting
DS Kouao, J Hanuš, O Kylián, R Simerova… - … and Sustainable Energy …, 2024 - Elsevier
In this work, unique semitransparent electrodes were prepared by the anodization of
titanium layers (540 nm thick) initially deposited on the both sides of glass substrates …
titanium layers (540 nm thick) initially deposited on the both sides of glass substrates …
Black TiO2 nanotube arrays decorated with Ag nanoparticles for enhanced visible-light photocatalytic oxidation of salicylic acid
Novel forms of black TiO 2 nanotubes-based photocatalysts for water purification were
prepared. Two features were combined: decoration of TiO 2 nanotube arrays with Ag …
prepared. Two features were combined: decoration of TiO 2 nanotube arrays with Ag …
Enhancing the solar water splitting activity of TiO2 nanotube-array photoanode by surface coating with La-doped SrTiO3
Photoelectrochemical water splitting has been considered one of the most promising
alternatives for the substitution of fossil fuels with a clean and renewable fuel, such as H 2 …
alternatives for the substitution of fossil fuels with a clean and renewable fuel, such as H 2 …
Hydrothermal Synthesis of FeOOH and Fe2O3 Modified Self-Organizing Immobilized TiO2 Nanotubes for Photocatalytic Degradation of 1H-Benzotriazole
In this study, titanium dioxide nanotubes were prepared by electrochemical anodization
technique and modified with an aqueous solution of FeCl3 using hydrothermal synthesis …
technique and modified with an aqueous solution of FeCl3 using hydrothermal synthesis …
Low-Cost Synthesis of Cu-Modified Immobilized Nanoporous TiO2 for Photocatalytic Degradation of 1H-Benzotriazole
Cu-modified immobilized nanoporous TiO2 photocatalysts, prepared by electrochemical
anodization of titanium foils, were obtained via four different synthesis methods …
anodization of titanium foils, were obtained via four different synthesis methods …
Novel geometric approach for photosensor construction based on dye-sensitization of TiO2 nanoparticles on stainless steel
We investigated a novel method of photosensor device fabrication which does not use
optically transparent electrodes (OTEs) and is based on dye sensitized solar cells (DSSCs) …
optically transparent electrodes (OTEs) and is based on dye sensitized solar cells (DSSCs) …
Influences of sputtering power and the surface roughness of substrates on the microstructures of sputtered Ti films and anodized TiO2 nanotubes
P Junbang, M Aiempanakit, C Aiempanakit… - Physica B: Condensed …, 2024 - Elsevier
This paper studied the influence of substrate morphology on Ti films deposited on FTO and
ITO substrates using the DC sputtering method at sputtering powers of 50–200 W. The …
ITO substrates using the DC sputtering method at sputtering powers of 50–200 W. The …
In-situ structural degradation study of quadruple-cation perovskite solar cells with nanostructured charge transfer layer
We investigated the structural stability of perovskite solar cells (PSCs) in nip configuration
comprising a rubidium-caesium-methylammonium-formamidinium (Rb–Cs–MA–FA) lead …
comprising a rubidium-caesium-methylammonium-formamidinium (Rb–Cs–MA–FA) lead …
Breakdown of the anodized nanostructured anatase for photovoltaic devices: The effect of water content in the electrolyte on preparation of large surfaces of …
Many researchers are heavily involved in attempts to optimise the course of the
electrochemical anodization for preparing nanostructured anatase thin-films. Particularly …
electrochemical anodization for preparing nanostructured anatase thin-films. Particularly …