[HTML][HTML] Characterization, nanomechanical, and wear attributes of sintered Al–TiB2 composites
Abstract Herein, Al–TiB 2 composites ranging from 2 to 8 wt.% TiB 2 addition developed
through a Turbula mixer and fast-assisted sintering technology were investigated. The …
through a Turbula mixer and fast-assisted sintering technology were investigated. The …
Alternative approach for efficient hole transporting electrode by depositing MWCNT layer on CZTS-MWCNT material for perovskite solar cell application
Metal electrode contact (ie, Al, Ag, and Au) used for charge collection at perovskite solar
cells (PSCs) needs an alternative replacement due to their expensive processing cost …
cells (PSCs) needs an alternative replacement due to their expensive processing cost …
Spark plasma sintering of CNT-NiAl nanocomposites–Process parameter, densification mechanism, and grain analysis
The densification process and grain analysis of consolidated NiAl-CNT composites at 1000°
C, and at varied heating rates from 50° C/min to 150° C/min was investigated. The results …
C, and at varied heating rates from 50° C/min to 150° C/min was investigated. The results …
The influence of dispersion time on the mechanical properties of spark plasma–sintered carbon nanotubes reinforced nickel-aluminum matrix composites
Abstract Nickel (Ni) and aluminum (Al) powders were milled with carbon nanotubes (CNT)
by employing the high-speed ball milling approach, and the consolidation was achieved by …
by employing the high-speed ball milling approach, and the consolidation was achieved by …
Spark Plasma Sintering of Dinickel Boride Reinforced Titanium Matrix Composites
The synthesis of dinickel boride (2.5 wt.% and 7.5 wt.%) reinforced with titanium matrix was
achieved using the spark plasma sintering. The characterization of the sintered samples was …
achieved using the spark plasma sintering. The characterization of the sintered samples was …
Enhancement of mechanical properties of carbon nanotube reinforced Al composites fabricated by spark plasma sintering using hot rolling techniques
T Okada, S Kimura, G Toma… - Materials Science Forum, 2022 - Trans Tech Publ
Recently much interest has been attracted in replacing heavy metals with light metals such
as aluminum to reduce weight to improve fuel efficiency of automobiles. However, weight …
as aluminum to reduce weight to improve fuel efficiency of automobiles. However, weight …
カーボンナノチューブ強化アルミニウム基複合材料の力学特性に及ぼす圧延加工と分散剤の影響
木村将吾 - 法政大学大学院紀要. 理工学研究科編, 2022 - cir.nii.ac.jp
In recent years, carbon nanotube (CNT) has been attractive to be used for reinforcements in
metal matrix composites (MMCs) to be applied to structural members because CNT has …
metal matrix composites (MMCs) to be applied to structural members because CNT has …
[CITAZIONE][C] Nial and steel as matrices and tic and oxynitrides as reinforcements in metal-matrix composite fabrication
ST Camagu - 2021 - University of Western Cape