A stress-aging treatment (SAT) was applied to an Al− Zn− Mg− Cu alloy to obtain a good
combination of strength and corrosion resistance. The effect of SAT on stress corrosion …

The microstructure, mechanical properties, and corrosion resistance of a Zr+ Er modified Al-
Zn-Mg-Cu alloy after different retrogression and re-aging (RRA) treatments were …

Composite micro-alloying is an important technique for develo** cost-effective, high-
performance aluminum alloys. Here, the effect of combined addition of Zr, Ti and rare-earth …

By using standard melting casting, homogenization, extrusion, solid solution, and T6 aging,
an Al-11Zn-3.1 Mg-1.2 Cu-0.2 Zr-0.16 Ti alloy was created, and the microstructure and …

The effects of ultrasonic impact treatment (UIT) on stress corrosion cracking (SCC) of 7075
aluminum alloy and its welded joints have been investigated. The microstructural evolution …

Abstract High strength Al–Zn–Mg–Cu alloys are widely used for structure components in
engineering applications, such as aerospace, transportation, owing to a superior …

This paper aims to investigate the effects of stress aging treatment on the microstructure,
mechanical properties and corrosion behavior of Al-Zn-Mg-Cu alloy. The alloys were …

The influence of low-frequency electromagnetic casting (LFEC) and Sc addition as variables
on the microstructure, properties, and deformation behavior of 7A36 aluminum alloy has …

The effects of solution and aging on the microstructure evolution, mechanical properties and
conductivity of cold rolled 2024 Al sheet were clarified. The results showed that the 2024 Al …

Abstract In this paper, 2A12-T3 aluminum alloy is first solution-treated and then experienced
an artificial aging for different time to induce different S phase characteristics. By using this …