Texture evolution in severe plastic deformation processes
Severe plastic deformation processes involve large grain rotations due to the action of
different modes of plastic deformation and other microstructural changes which lead to …
different modes of plastic deformation and other microstructural changes which lead to …
Superplasticity in high temperature magnesium alloy WE43
Severe plastic deformation of the magnesium alloy WE43 (Mg-4% Y-2.3% Nd-0.5% Zr) has
been carried out by multi-axial forging (MAF) in order to refine the grain size from 25 µm to 6 …
been carried out by multi-axial forging (MAF) in order to refine the grain size from 25 µm to 6 …
Texture control to reduce yield strength anisotropy in the third generation aluminum-copper-lithium alloy: Experiments and modeling
In the present work, attempts have been made to control the yield strength anisotropy in an
Al–Cu-Li alloy by implementing a novel processing route combining multi-axial forging …
Al–Cu-Li alloy by implementing a novel processing route combining multi-axial forging …
Evolution of microstructure and texture in the third generation Al–Li alloy AA2195 during warm hybrid processing
In the present study, the evolution of microstructure, crystallographic texture and their
influence on mechanical properties of the Al–Li alloy, AA2195 has been studied. A novel …
influence on mechanical properties of the Al–Li alloy, AA2195 has been studied. A novel …
Precipitation response of the magnesium alloy WE43 in strained and unstrained conditions
The precipitation behavior of the magnesium alloy WE43 (Mg–4% Y–2.3% Nd–0.5% Zr) has
been studied in strained and unstrained conditions using Transmission Electron Microscopy …
been studied in strained and unstrained conditions using Transmission Electron Microscopy …
Multi-axial forging of Nb-1wt.% Zr: effect of annealing on microstructure and mechanical properties
Abstract Nb-1wt.% Zr was subjected to severe plastic deformation at room temperature using
multi-axial forging (MAF) in a closed channel die to an effective strain of 4.6. Separate such …
multi-axial forging (MAF) in a closed channel die to an effective strain of 4.6. Separate such …
Microstructure and crystallographic texture evolution during the friction-stir processing of a precipitation-hardenable aluminum alloy
Friction-stir processing (FSP) has been proven as a successful method for the grain
refinement of high-strength aluminum alloys. The most important attributes of this process …
refinement of high-strength aluminum alloys. The most important attributes of this process …
A comprehensive study on texture development and twin-related domain evolution following hot compression in a super austenitic stainless steel
Uniaxial hot deformation was carried out in a wide range of temperatures (1173 K to 1423 K)
and strain rates (0.001 to 10 s− 1) in a super austenitic stainless steel employing a Gleeble …
and strain rates (0.001 to 10 s− 1) in a super austenitic stainless steel employing a Gleeble …
Unusual rolling texture in ferritic/martensitic steel
VD Sitdikov, RK Islamgaliev, GF Sitdikova… - Journal of Materials …, 2022 - Springer
This paper presents the results of studies on texture formation in ferritic/martensitic steel
12Cr-2W subjected to equal channel angular pressing, warm rolling, and additional heat …
12Cr-2W subjected to equal channel angular pressing, warm rolling, and additional heat …
Electrical conductivity, thermal stability, and lattice defect evolution during cyclic channel die compression of OFHC copper
SS Satheesh Kumar, T Raghu - Journal of Materials Engineering and …, 2015 - Springer
Oxygen-free high-conductivity (OFHC) copper samples are severe plastically deformed by
cyclic channel die compression (CCDC) technique at room temperature up to an effective …
cyclic channel die compression (CCDC) technique at room temperature up to an effective …