The unique combination of very large strains, high temperatures and high strain rates
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …

Stir casting is an economical process for the fabrication of aluminum matrix composites.
There are many parameters in this process, which affect the final microstructure and …

In this study, the metal matrix composite materials were produced by hot press with various
production parameters. The drilling experiments were performed on computer numerical …

This paper investigates the effect of different tool pin morphologies on the inter-mixing
capability, microstructure, mechanical properties, corrosion, fracture, and wear behaviors of …

Aluminum matrix composites (AMCs) reinforced with particles are of the most widely applied
commercial materials. Among the numerous methods for AMCs production, the powder …

From the viewpoints of particle refinement and homogeneous distributions of reinforcing
phase, this work proposed a novel method to prepare Al/Mg 2 Si composites. Mg 2 Si …

An as-cast aluminum-matrix composite (AMC) with in-situ formed Mg 2 Si phase was
subjected to high-temperature annealing, hot rolling, and hot extrusion processes. The …

In the present work, the compressive formability of porous Al/SiC composites fabricated
through mechanical alloying (MA) is investigated. Aluminum matrix composites consisting of …

To modify the coarse primary Mg 2 Si phase and improve mechanical properties of Mg 2 Si
reinforced aluminum matrix composites, hypereutectic Al–18Mg 2 Si composites with …

This work investigated the microstructure evolution, tensile, impact, hardness, and sliding
wear properties of an Al–20Mg 2 Si–2Cu in situ composite treated with different Bi contents …