In industrial applications, fretting and sliding wear can be encountered by the same friction
pair depending on the working conditions. In this study, fretting and sliding wear properties …

In the aerospace industry, fretting and sliding wear are commonly encountered by
components made from M50 bearing steel. This study aims to investigate the effect of …

This work employed molecular dynamics (MD) to investigate the wear mechanism in the
drilling motion of FeCrNiCoAl high entropy alloy. MD simulations reveal a reduction in …

The evaluation and prediction on failure of friction pair are important for improving
equipment reliability and life span. In engineering practice, researchers often determine the …

Laser cladding composite coatings were fabricated on the surface of the Ti6Al4V substrate
by fiber laser cladding the NiCrBSi alloy powder. The influences of scanning speed on the …

A novel process called continual local induction cladding (CLIC) was proposed to clad
NiCrBSi alloy coatings on AISI 1045 steel substrate with the scanning speed of 0.5, 1.0 and …

Abstract In this paper, Ti/TiBCN reinforced Ti based composite coatings were prepared on
Ti6Al4V alloys. The influence of the scanning speed on the dilution rate, microstructure and …

Wear is the primary cause of damage to the bushing area of the Variable Stator Vane (VSV)
mechanism. This paper presents an approach for predicting the wear-damage behavior of …

Titanium (Ti) and its alloys are widely used in biomedical applications due to their excellent
mechanical properties and biocompatibility. However, they are a concern due to the …

Abstract In situ Mg 2 Si particles often show coarse and irregular morphologies in Al–matrix
composites, which results in inhomogeneous microstructures and poor mechanical …