To facilitate the large-scale deployment of the adsorption-based gas separation technique,
the integration of adsorbents derived from laboratories with gas–solid contactors in the …

As a rapid prototy** technology, 3D printing has become one of the key technologies as
the adsorption forming strategy due to the diversity and convenience in structural design …

Self-standing 3D-printed gyroid monoliths of zeolite 13X were fabricated for the first time for
carbon dioxide adsorption. Gyroid sheet-based triply periodic minimal surface (TPMS) …

Abstract 3D-printed adsorbents are gaining increased attention owing to their potential in
overcoming operational challenges faced by the conventionally structured counterparts. In …

Sorption-enhanced reactions shift the reaction equilibrium by the in situ sorption of one of
the reaction products. This review highlights recent developments in the sorption-enhanced …

Low‐cost direct air capture (DAC) systems require efficient gas–solid contactors. These
contactors provide rapid rates of heat and mass transport with minimal pressure drops. Triply …

Additive manufacturing, or 3D-printing, has emerged as a useful tool for develo** tailored
porous structures for CO 2 capture and utilization aiming at addressing challenges …

Pressure swing adsorption is widely applied in industry for hydrogen purification, methane
recovery, air separation, biomass upgrading, CO 2 recovery, to name a few. To further …

A 3D-printed sorbent containing polyethylene-imine and multi-walled carbon nanotubes
(PEI-MWCNT) was studied for post-combustion carbon capture. In this work, the adsorbent …

Anthropogenic emissions of green-house gases and increasing CO 2 atmospheric
concentration are considered the major causes of global warming and ocean acidification …