In situ composite manufacture is an approach to improve interfacial adhesion between
matrix and reinforcements, in which reinforcements are synthesized along composite …

Spark plasma sintering (SPS) is a type of pulsed electric current-assisted sintering
technique. This method allows for rapid consolidation of powder materials into dense bulk …

Titanium carbide (TiC) composites containing 10 vol% silicon carbide whisker (SiC w) were
spark plasma sintered at different temperatures of 1800, 1900, and 2000° C under a …

Monolithic titanium and composites doped with 0.24, 0.48, 0.96 and 1.92 wt% B 4 C were
sintered by SPS method at 1200° C for 5 min under 50 MPa. The effect of B 4 C as a …

The quality and properties of a material can be improved by the choice of processing
technique adopted. This study investigates the influence of process parameters of spark …

This study introduces an innovative alloy design strategy by integrating HEAs principles to
develop CoNi-based high entropy superalloys (HESAs). The powder of designed HESA …

To enhance the wear resistance of the Ti6Al4V alloy surfaces, four TiB-reinforced titanium
matrix composite (TMC) coatings were in-situ synthesized via laser cladding. This study …

In the present research work, various ceramic materials such as Al 2 O 3-Cr 2 O 3-SiC, and
Al 2 O 3-ZrO 2-TiO 2 were developed for the analysis of wear performance and hardness …

Wet chemical and pyrolytic process is used to reduce zirconium oxide uniformly distributed
in liquidic polysilazane preceramic precursor via sodium borohydride and zirconium n …

As an ultra-high-temperature ceramic (UHTC), TiB 2 possesses many magnificent
advantages, such as high melting point, great hardness, good wear resistance, good …