To reduce the energy consumed by building part, a new method of producing foam glass at
low temperature was proposed in this study. Mineral wool waste and waste glass recycled …

Abstract Alumina (Al 2 O 3) remains one the most important engineering ceramic for
industrial applications. In addition to the α phase, transition alumina phases have interesting …

Municipal solid waste incineration (MSWI) fly ash (FA) is a typical hazardous waste due to its
high contents of toxic heavy metals, and hence its disposal has attracted global concern. In …

Various glass-ceramics were prepared based on the CaO-Al 2 O 3-SiO 2 system with the
addition of Li 2 O in an attempt to develop a suitable sealant for SiC ceramic. The effects of …

The mixing of galvanized sludge in fired clay brick manufacturing has been regarded as an
alternative approach for the consumption of galvanized sludge. Decreasing the surface area …

The introduction of electroplating sludge in the manufacturing of clay brick can be
considered a feasible method to consume it, while physical-mechanical performances would …

Porous anorthite ceramics, as emerging green materials, garner significant interest in
applications such as catalyst carriers, thermal insulation, and sound absorption due to their …

The increasing depletion of natural clay resources and the indiscriminate dum** of solid
waste has exerted unprecedented pressure on the environment. This study primarily aims to …

Abstract A novel CaO-Li 2 O-Al 2 O 3-SiO 2 (CLAS) glass was developed for the joining of
porous Si 3 N 4 and dense Si 3 N 4. A multiphase interlayer consisting of CaAl 2 Si 2 O 8 …

A mixture of kaolin (92 wt.% of kaolinite) and laboratory-grade CaCO 3 was used for
anorthite preparation using the spark plasma sintering (SPS) technique. The powder was …