Neural-network-based approaches for optimization of machining parameters using small dataset
Surface quality is one of the most important indicators of the quality of machined parts. The
analytical method of defining the arithmetic mean roughness is not applied in practice due to …
analytical method of defining the arithmetic mean roughness is not applied in practice due to …
Performance of water-based TiO2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
The effects of cutting parameters on the wear mechanisms in the end milling of aluminium
alloy AA6061 with minimum quantity lubrication (MQL) conditions using water-based TiO 2 …
alloy AA6061 with minimum quantity lubrication (MQL) conditions using water-based TiO 2 …
Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components
Improving product quality during machining of thin-wall components has always been a
challenging problem due to the low rigidity of work parts. Therefore careful selection of …
challenging problem due to the low rigidity of work parts. Therefore careful selection of …
Optimization of engine parameters in a bio diesel engine run with honge methyl ester using response surface methodology
In the present study an attempt has been made to optimize the engine operating parameters
for the optimum thermal performance of a diesel engine fuelled with blends of honge methyl …
for the optimum thermal performance of a diesel engine fuelled with blends of honge methyl …
[PDF][PDF] Modification of CNC machine tool operations and structures using finite element methods, A review
To increase accuracy as well as productivity in CNC machine tools, Finite Element Method
(FEM) are applied to the machining operations and machine tool structures. As a result, the …
(FEM) are applied to the machining operations and machine tool structures. As a result, the …
Tool life and wear mechanism when machining Hastelloy C-22HS
This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS
with coated carbide. The experiment was conducted using four different cutting tool …
with coated carbide. The experiment was conducted using four different cutting tool …
Experimental investigation of flank wear in end milling of aluminum alloy with water-based TiO2 nanofluid lubricant in minimum quantity lubrication technique
MS Najiha, MM Rahman - The International Journal of Advanced …, 2016 - Springer
This paper investigates the minimum quantity lubrication technique in end milling of
aluminum alloy AA6061 with minimum quantity lubrication (MQL) conditions using nanofluid …
aluminum alloy AA6061 with minimum quantity lubrication (MQL) conditions using nanofluid …
Optimization of surface roughness in end milling using potential support vector machine
This paper is concerned with the optimization of the surface roughness when milling
aluminium alloys (AA6061-T6) with carbide coated inserts. Optimization of milling is very …
aluminium alloys (AA6061-T6) with carbide coated inserts. Optimization of milling is very …
Application of Response Surface Methodology in optimizing the process parameters of Twist Extrusion process for AA6061-T6 aluminum alloy
The effect of process parameters such as forming load, temperature and the number of
passes on AA6061-T6 alloy subjected to severe plastic deformation by twist extrusion …
passes on AA6061-T6 alloy subjected to severe plastic deformation by twist extrusion …
[HTML][HTML] Response ant colony optimization of end milling surface roughness
Metal cutting processes are important due to increased consumer demands for quality metal
cutting related products (more precise tolerances and better product surface roughness) that …
cutting related products (more precise tolerances and better product surface roughness) that …