The primary spacing is intrinsically linked with the mechanical behavior of directionally
solidified materials. Because of this relationship, a significant amount of solidification work is …

Titanium alloys show attractive properties for biomedical applications where the most
important factors are biocompatibility, corrosion resistance, low modulus of elasticity, very …

To reveal the influence of porosity on the variability in mechanical properties of HPDC Al
alloys, micro computed tomography was employed to investigate the morphology and 3D …

The effects of cooling rate on the solidification parameters and microstructure of Al-7Si-0.3
Mg-0.15 Fe alloy during solidification process were studied. To obtain different cooling rates …

Since the 1980s, the titanium alloys show attractive properties for biomedical applications
where the most important factors are, firstly, biocompatibility, corrosion and mechanical …

The thermal conductivity of Mg-Sm binary alloys is relatively poor due to the severe lattice
distortion introduced by the high solid solubility Sm atom in the Mg matrix, which restricts …

Abstract Outdoor applications of Al–Mg–Si alloys have been specified due to their very good
corrosion resistance when compared with those of other aluminum alloys. Nevertheless …

Abstract Alloys of Al-Sn and Al-Si are widely used in tribological applications such as
cylinder liners and journal bearings. Studies of the influence of the as-cast microstructures of …

The correlation of mechanical properties and corrosion behavior with microstructure
parameters can be very useful for planning solidification conditions in order to achieve a …

This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …