Rechargeable sodium‐ion batteries (SIBs) are emerging as a viable alternative to lithium‐
ion battery (LIB) technology, as their raw materials are economical, geographically abundant …

Moisture, heat, and light instabilities of halide perovskites (HPs) represent a serious Achilles'
heel that must be overcome, to enable future advancements in perovskite‐based …

Abstract Effects of strain amplitude ranging from 0.2% to 1.0% on the low-cycle fatigue
properties of Inconel 617 alloy at 700° C were studied. Much attention was paid to reveal the …

The gradient microstructure occurring adjacent to fusion interface of dissimilar metal
between high Cr steel and nickel-based Alloy 617 was characterized in detail, and its …

In the present study, fatigue damage evolution of Inconel 617 at 600° C and 700° C was
investigated by using an in situ scanning electron microscope (SEM) fatigue test. The fatigue …

The microstructure evolution of 617B superalloy especially the dissolution behavior of
intragranular M 23 C 6 carbide has been investigated after aging at 700° C and 750° C up to …

Interfacial creep failure was strongly affected by the solidified grain boundary (SGB) for
steel/nickel dissimilar metal welded joints, especially at higher temperatures and lower …

Hydrogen environment embrittlement (HEE) in a nickel-base superalloy, INCONEL® Alloy
617, was scrutinized using a notch tensile test in a 99 MPa hydrogen atmosphere to …

Phase precipitation behavior and its influence on mechanical properties of a solid-solution
strengthened Ni-based alloy, used to manufacture large casting components in next …

The microstructural evolution during long-term thermal exposure of Alloy 617 is investigated
in detail. During processing, various precipitation phases were formed, including MC, M 23 …