Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Use of the multiple stress creep recovery (MSCR) test to characterize the rutting potential of asphalt binders: A literature review
The multiple stress creep recovery (MSCR) test has been recently accepted to improve the
rutting assessment of the Superpave performance grading (PG) system. The non …
rutting assessment of the Superpave performance grading (PG) system. The non …
[HTML][HTML] Review on laboratory preparation processes of polymer modified asphalt binder
Several previous studies have documented the progress in polymer modified asphalt binder
with respect to materials' types and properties. However, limited or no effort was made to …
with respect to materials' types and properties. However, limited or no effort was made to …
Asphalt concrete mixtures modified with polymeric waste by the wet and dry processes: A literature review
Modification of asphalt binders with virgin polymers is a consolidated practice in pavement
construction, as it is an effective way to enhance pavement performance. In recent years …
construction, as it is an effective way to enhance pavement performance. In recent years …
Evaluation of high temperature rheological performance of polyphosphoric acid-SBS and polyphosphoric acid-crumb rubber modified asphalt
This study explores the effects of polyphosphoric acid (PPA) on the rheological performance
of styrene butadiene styrene (SBS) and crumb rubber (CR) modified asphalt binders at high …
of styrene butadiene styrene (SBS) and crumb rubber (CR) modified asphalt binders at high …
Evaluating the low-temperature creep properties of polyphosphoric acid-polymer composite-modified asphalt
Y Wen, F Ma, Z Fu, J Liu, J Dai, C Li… - International Journal of …, 2023 - Taylor & Francis
The objective of this study was to explore the effect of polyphosphoric acid (PPA) on the low-
temperature creep properties of styrene–butadiene-styrene (SBS) and crumb rubber (CR) …
temperature creep properties of styrene–butadiene-styrene (SBS) and crumb rubber (CR) …
Evaluation of degradation of SBS modified asphalt binder because of RTFO, PAV, and UV aging using a novel extensional deformation test
R Hossain, NM Wasiuddin - Transportation Research …, 2019 - journals.sagepub.com
Styrene-butadiene-styrene (SBS) modified PG 64-22 and PG 76-22 binders are studied to
investigate the degradation of polymer because of aging applied by: rolling thin film oven …
investigate the degradation of polymer because of aging applied by: rolling thin film oven …
Bitumen Resistance to Plastic Deformation at High Temperatures
IV Gordeeva, TV Dudareva, IA Krasotkina… - Petroleum …, 2023 - Springer
A number of Russian bitumen samples with the penetration range of 60 to 120× 0.1 mm
were rheologically investigated in the temperature range of 46–70° C to evaluate their …
were rheologically investigated in the temperature range of 46–70° C to evaluate their …
Rheological performance of asphalt binders under different creep and recovery periods in MSCR test
The present study was undertaken to evaluate the effects of creep and recovery periods on
rheological responses and grading of the modified (polymer and crumb rubber modified) …
rheological responses and grading of the modified (polymer and crumb rubber modified) …
Nonrecoverable compliance and recovery behavior of polymer-modified and reclaimed asphalt pavement–modified binders in Arkansas
For quality assurance and quality control purposes, suppliers and users of asphalt binders
follow the widely used dynamic shear rheometer (DSR) test method (AASHTO T 315 …
follow the widely used dynamic shear rheometer (DSR) test method (AASHTO T 315 …
[PDF][PDF] Rheological properties of polymer and rap modified asphalt binders using multiple stress creep and recovery method
SA Ali - 2016 - core.ac.uk
At the beginning, I would like to thank God, The Almighty, for His countless blessings in
every step of my life. Secondly, I want to thank my parents and siblings, who have always …
every step of my life. Secondly, I want to thank my parents and siblings, who have always …