In this study, friction performance, surface textures, and wear mechanisms of Titanium Grade
(Gr) 2 material were investigated with a pin-on-disc tester. The study was carried out under …

The improvement of hard machining efficiency has been a growing concern in the
production practice while the environmental friendly characteristics have to be guaranteed …

In this study, a novel lubricant additive nitrogen-doped carbon quantum dot (N-CQD)
nanoparticle was prepared by the solvothermal method. The synthesized spherical N-CQD …

In this research work, the stability, tribological, and corrosion properties of a water-based
Al2O3 nanofluid (0.5 wt%) formulated with tannin acid (TA) and carboxymethyl cellulose …

Nanofluids are prepared to enrich thermo-physical and convective heat transfer properties
by suspending nanometer particles in a base fluid. For different nanoparticles …

In this study, the effect of sustainable cooling and lubrication strategies such as MQL, LN 2,
LN 2+ MQL, LN 2+ hBN/GA, LN 2+ GNP/GA, LN 2+ hBN-GNP/GA on drilling nickel-based …

A new strategy for improving high-temperature compressive strength and tribological
properties of Al 2 O 3/Cr 2 O 3 composites was proposed in this study. The three …

Traditional lubricating oil in the lubrication process leads to oil film rupture and lubrication
failure due to thermal instability under high temperatures. Tribological characteristics of …

In our present work, alumina/BNNTs and alumina/MoS 2 coatings were deposited onto
stainless steel substrates by solution precursor high velocity oxy-fuel thermal spraying. The …

Nanolubricants are the preferred method for improving the anti-friction and-wear
performance of the moving components of machines. However, the lubrication performance …