[HTML][HTML] Structural, mechanical and tribological performance of a nano structured biomaterial Co–Cr–Mo alloy synthesized via mechanical alloying
The influence of milling time on the tribological behavior of a Co–Cr–Mo alloy designed for
biomedical applications, synthesized via mechanical alloying is investigated. Elemental Co …
biomedical applications, synthesized via mechanical alloying is investigated. Elemental Co …
[HTML][HTML] Investigating the effect of milling time on structural, mechanical and tribological properties of a nanostructured hiped alpha alumina for biomaterial …
In this work was prepared α-Al 2 O 3 alloys from laboratory aluminum oxide powder that was
milled for different periods of time and sintered at a temperature of 1450° C. The difference …
milled for different periods of time and sintered at a temperature of 1450° C. The difference …
High photocatalytic capacity of porous ceramic-based powder doped with MgO
To purify water at low cost for our daily life, the effect of ceramic-based (mullite–cristobalite)
and (mullite–zircon) powders doped with different amounts of magnesium oxide (MgO)(10 …
and (mullite–zircon) powders doped with different amounts of magnesium oxide (MgO)(10 …
Structural and mechanical evaluation of a new Ti-Nb-Mo alloy produced by high-energy ball milling with variable milling time for biomedical applications
The main focus of this work is to investigate the impact of varying milling times (2 to 18 h) on
the structural and mechanical properties of the developed Ti-Nb-Mo alloy. The morphology …
the structural and mechanical properties of the developed Ti-Nb-Mo alloy. The morphology …
[HTML][HTML] An examination of the enhanced photocatalytic performance of PEO coatings applied on Mg alloys: A review
There has been considerable research into the use of powdered photocatalysts for their
potential to remove a range of contaminants. However, the use of photocatalytic …
potential to remove a range of contaminants. However, the use of photocatalytic …
[HTML][HTML] Improvement of photocatalytic performance and sensitive ultraviolet photodetectors using AC-ZnO/ZC-Ag2O/AZ-CuO multilayers nanocomposite prepared by …
Morphological and optical properties of a multilayer film (CAZO/CZAO/ZACO) prepared by
spin-coating method and deposited on a glass substrate were evaluated. The study was …
spin-coating method and deposited on a glass substrate were evaluated. The study was …
Properties of MZO/ceramic and MZO/glass thin layers based on the substrate's quality
To evaluate the role played by the substrates on the change and the actual difference of the
studied samples on their structural, morphological, optical and photocatalytic properties, thin …
studied samples on their structural, morphological, optical and photocatalytic properties, thin …
[HTML][HTML] Structural, and tribological properties of nanostructured α+ β type titanium alloys for total hip
Titanium alloys are in demand for various biomedical applications and the most popular
among them being, Ti–6Al–4V. Hence, in this study, Ti–6Al–7Nb are fabricated through the …
among them being, Ti–6Al–4V. Hence, in this study, Ti–6Al–7Nb are fabricated through the …
[HTML][HTML] Effect of milling time on structural, physical and tribological behavior of a newly developed Ti-Nb-Zr alloy for biomedical applications
Titanium (Ti)-based alloys with only a β-phase have attracted academic and industrial
interest for orthopedic application, due to their close properties to those of tissues. The …
interest for orthopedic application, due to their close properties to those of tissues. The …
[HTML][HTML] Investigating the effect of Zr content on electrochemical and tribological properties of newly developed near β-type Ti-alloys (Ti–25Nb-xZr) for biomedical …
In order to create alloys with exceptional properties for orthopedic uses, this study focuses
on the impact of zirconium (Zr) content on the structural, electrochemical, and tribological …
on the impact of zirconium (Zr) content on the structural, electrochemical, and tribological …