Crack identification and quantification methods under the condition of lift-off effect using alternating current field measurement technique
Alternating current field measurement (ACFM) technique is an emerging non-destructive
testing method for detecting cracks in conductive material. However, the existence of lift-off …
testing method for detecting cracks in conductive material. However, the existence of lift-off …
Experimental assessment of self-healing nature in aluminum-based smart composites with NiTi wires and solder alloy as healing agents through Taguchi approach
In this article, the healing assessment of the AA2014 matrix reinforced with NiTi wires and
solder alloy as healing agents is investigated through flexural testing. The idea of a smart …
solder alloy as healing agents is investigated through flexural testing. The idea of a smart …
Method for detecting and locating cracks in aluminum plates based on balanced field electromagnetic technique
W Zheng, J Li - Measurement, 2024 - Elsevier
Aluminum plates are susceptible to environmental and fatigue loads producing randomly
distributed cracks and thus compromising safety performance. This paper proposes a …
distributed cracks and thus compromising safety performance. This paper proposes a …
Simulation and design of a balanced-field electromagnetic technique sensor for crack detection in long-distance oil and gas pipelines
L Yang, J Li, W Zheng, B Liu - Energies, 2022 - mdpi.com
Due to the extremely small size and arbitrary orientation of the cracks, a highly sensitive
sensor based on the balanced-field electromagnetic technique was designed for in-line …
sensor based on the balanced-field electromagnetic technique was designed for in-line …
Processing methods of the pipeline crack detection signal by a balanced field electromagnetic technique based on phase characteristics
W Zheng, J Li, Y **ao - Review of Scientific Instruments, 2023 - pubs.aip.org
The balanced field electromagnetic technique is an effective way of in-line inspection to
detect cracks in pipelines. A signal demodulation method based on phase characteristics is …
detect cracks in pipelines. A signal demodulation method based on phase characteristics is …
Hybrid GMR/IR probe to reduce the effects of lift-off
Eddy current testing technique is being utilized in engineering, such as in nuclear steam
pipe, aircraft and gas/oil pipeline, due to its sensitivity to small cracks and subsurface …
pipe, aircraft and gas/oil pipeline, due to its sensitivity to small cracks and subsurface …
Investigation of GMR Eddy current permanent magnet system for carbon steel corrosion identification using IoT unmanned aerial vehicles drone platform
Eddy current test (ECT) is one of the techniques for accurate testing as well as widely used
in the aircraft and nuclear industry. Changes in thickness due to corrosion will affect the …
in the aircraft and nuclear industry. Changes in thickness due to corrosion will affect the …
Investigation the effect of heat treatment on brass defect measurement using Eddy Current Testing
Eddy current technology has been used as a non-destructive method of measuring material
properties for many years. Most applications of the eddy current technique lie in locating …
properties for many years. Most applications of the eddy current technique lie in locating …
The Effect of Gain and Frequency on Eddy Current Testing for Copper Material Defect Inspection
Copper and the copper alloys are some of the most versatile materials available and used
for applications in every type of industry with world consumption of exceeding 14 million …
for applications in every type of industry with world consumption of exceeding 14 million …