In present paper, the effect of Scandium and Erbium alloying on the microstructure evolution
and mechanical performance at elevated temperature for Al-Li-Cu-Mg alloy are investigated …

The distribution and size of particles in particle-reinforced aluminum matrix composites are
crucial to the mechanical properties of the composites. In this paper, 2 wt.% TiB 2/2195 …

Abstract The effects of Gd, Sn and Cu on the corrosion behavior of as extruded Mg–8Li–3Al
(LA83) alloy were characterized by scanning Kelvin probe force microscopy, weight loss …

The 2024 aluminum alloy has excellent mechanical and low corrosion due to the existence
of the high Cu levels, which shortens its service life. In this paper, we have systematically …

Ambient-temperature mechanical properties of isochronally aged 1420-Sc-Zr aluminum
alloy were investigated. A significant grain refinement is caused with the additions of Sc and …

Twin-roll casting (TRC) process combines continuous casting and rolling deformation into
one process, which compensates for the solidification shrinkage of liquid metal in the roll …

The effects of Mg content on the microstructure, mechanical properties and intergranular
corrosion (IGC) resistance of Al-Cu-XMg-Ag (X= 0.35–1.27 wt%) alloys are investigated by a …

The addition of minor Mg (~ 0.4 wt%) to Al-Cu-Li alloy could not only modify the precipitation
path but also promote the precipitation of T 1 (Al 2 CuLi) phase, however, the influence of …

The microstructure and mechanical properties of Al-3Li-1Cu-0.1 Zr-xEr (x= 0, 0.1) alloys
were investigated. With an addition of 0.1 wt% Er, dispersive core-shell structure Al 3 (Er, Zr …

Transmission electron microscope and selected area electron diffraction were employed to
characterise the precipitates in 2A97 Al–Li alloy with 1.5 wt% Li concentration, which were …