Impact of lower and higher alcohols on the physicochemical properties of particulate matter from diesel engines: A review
The literature reveals that fossil fuels will continue to be the main energy source for
transportation fleets up to 2050, despite their non-renewability and the emissions of …
transportation fleets up to 2050, despite their non-renewability and the emissions of …
Comparison of multiple diagnostic techniques to study soot formation and morphology in a diffusion flame
Different non-intrusive optical and intrusive non optical diagnostic methods are used to
measure flame and soot properties in a laminar coflow diffusion flame in order to compare …
measure flame and soot properties in a laminar coflow diffusion flame in order to compare …
Physicochemical and cell toxicity properties of particulate matter (PM) from a diesel vehicle fueled with diesel, spent coffee ground biodiesel, and ethanol
The literature shows that information about the physical, chemical, and cell toxicity
properties of particulate matter (PM) from diesel vehicles is not rich as the existence of a …
properties of particulate matter (PM) from diesel vehicles is not rich as the existence of a …
Physical, chemical, and cell toxicity properties of mature/aged particulate matter (PM) trapped in a diesel particulate filter (DPF) along with the results from freshly …
The lifetime and efficiency of diesel particulate filters (DPFs) strongly depend on the proper
and periodic cleaning and servicing. Unfortunately, in some cases, inappropriate methods …
and periodic cleaning and servicing. Unfortunately, in some cases, inappropriate methods …
Particulate emission and physical properties of particulate matter emitted from a diesel engine fueled with ternary fuel (diesel-biodiesel-ethanol) in blended and …
The present study aimed to explore the influences of different fueling modes, including
diesel alone, blended, fumigation and a combined fumigation+ blended (F+ B) modes, on …
diesel alone, blended, fumigation and a combined fumigation+ blended (F+ B) modes, on …
Soot: A review of computational models at different length scales
The computational modelling of soot formation and destruction during the combustion
process is one of the most challenging topics in combustion research. This paper reviews …
process is one of the most challenging topics in combustion research. This paper reviews …
Predicting the fire spread rate of a sloped pine needle board utilizing pyrolysis modelling with detailed gas-phase combustion
Abstract A novel Large Eddy Simulation (LES) based fire field model that incorporates
pyrolysis modelling has been developed. This model is specifically designed for flame …
pyrolysis modelling has been developed. This model is specifically designed for flame …
Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images
The thermophoretic sampling of particulates from hot media, coupled with transmission
electron microscope (TEM) imaging, is a combined approach that is widely used to derive …
electron microscope (TEM) imaging, is a combined approach that is widely used to derive …
Flame–wall interaction effects on diesel post-injection combustion and soot formation processes
The aim of this study is to investigate the impact of walls on soot processes of a post-
injection strategy at different dwell times. The experiments were performed in an optically …
injection strategy at different dwell times. The experiments were performed in an optically …
Color-ratio pyrometry methods for flame–wall im**ement study
The use of color-ratio pyrometry (CRP) methods, with variable or prescribed soot content
(KL) to image flame–wall interactions was examined, with results compared with that …
(KL) to image flame–wall interactions was examined, with results compared with that …