Insights to improve the tribo-performance of materials used under slurry erosion applications: A review
Slurry erosion usually results in the form of damage to the materials of different components
having underwater working domain. Numerous industries have suffered due to this kind of …
having underwater working domain. Numerous industries have suffered due to this kind of …
Role of thermal spray coatings on erosion, corrosion, and oxidation in various applications: a review
Depending on the location, extreme environmental conditions must have different graded
properties. This is especially important for surfaces that are exposed to mechanical …
properties. This is especially important for surfaces that are exposed to mechanical …
Dry sliding and slurry abrasion behaviour of wire arc additive manufacturing–Cold metal transfer (WAAM-CMT) cladded inconel 625 on EN8 steel
Inconel 625 was cladded over tillage material EN8 with Wire Arc Additive Manufacturing
(WAAM)-Cold metal Transfer (CMT) using varied input parameters. For examining the …
(WAAM)-Cold metal Transfer (CMT) using varied input parameters. For examining the …
Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing
Surface modification by suitable technique aids in improving the characteristics of material to
resist severe wear in demanding environments and challenging applications. The present …
resist severe wear in demanding environments and challenging applications. The present …
Slurry erosion behaviour of HVOF sprayed VC+ TiC based novel coatings: characterization and optimization studies
The current experimental work is focused on development and characterization of HVOF
sprayed VC-TiC+ CuNi-Cr based coatings on hydro-machinery steel SS316. Empirical …
sprayed VC-TiC+ CuNi-Cr based coatings on hydro-machinery steel SS316. Empirical …
Cavitation erosion behavior of high velocity oxy fuel (HVOF) sprayed (VC+ CuNi-Cr) based novel coatings on SS316 steel
A well-known hard material (VC) has not been explored as potential candidate for surface
modifications to overcome the problem of cavitation erosion (CE) in hydro machinery …
modifications to overcome the problem of cavitation erosion (CE) in hydro machinery …
Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding
YF Liu, SG Zhuang, XB Liu, CS OuYang, Y Zhu… - Surface and Coatings …, 2021 - Elsevier
A series of composite coatings (Ni60-Ti 3 SiC 2) were prepared by laser cladding on 304
stainless steel (SUS304). Then the tribological properties were investigated at room …
stainless steel (SUS304). Then the tribological properties were investigated at room …
Influence of laser cladding parameters on slurry erosion performance of NiCrSiBC+ 50WC claddings
Various components employed in hydro machines are rigorously affected by the presence of
sand particles throughout their operation which leads to degradation of the target surface. To …
sand particles throughout their operation which leads to degradation of the target surface. To …
Development, characterization, and cavitation erosion analysis of high velocity oxy-fuel (HVOF) sprayed TiC and (70Cu-30Ni)-Cr based composite coatings on SS316 …
A novel composite coating was developed by depositing powders of Titanium Carbide (TiC)
with Cupronickel (70Cu-30Ni) and Chromium (Cr) as binders onto SS316 steel specimens …
with Cupronickel (70Cu-30Ni) and Chromium (Cr) as binders onto SS316 steel specimens …
Tribological study of Ti3SiC2/Cu5Si/TiC reinforced Co-based coatings on SUS304 steel by laser cladding
G Wang, XB Liu, GX Zhu, Y Zhu, YF Liu, L Zhang… - Surface and Coatings …, 2022 - Elsevier
For the needs of the key moving parts of SUS304 steel in extreme environments, the
composite coatings (Co-Ti 3 SiC 2/Cu) were successfully fabricated by laser cladding. The …
composite coatings (Co-Ti 3 SiC 2/Cu) were successfully fabricated by laser cladding. The …