Review on the prediction of residual stress in welded steel components
Residual stress after welding has negative effects on the service life of welded steel
components or structures. This work reviews three most commonly used methods for …
components or structures. This work reviews three most commonly used methods for …
Integrated crystal plasticity and phase field model for prediction of recrystallization texture and anisotropic mechanical properties of cold-rolled ultra-low carbon steels
A multi-scale approach integrating a polycrystal plasticity finite element (CPFEM) and a multi-
phase field model (PFM) is developed in this study and employed to the prediction of …
phase field model (PFM) is developed in this study and employed to the prediction of …
[HTML][HTML] Prediction of martensitic transformation and residual stress field on 17–4 PH stainless steel fabricated by laser powder bed fusion
Abstract The 17–4 precipitation-hardened (PH) alloy can be printed into diverse
microstructures. Existing reports on the alloy have focused on the effect of Cr eq/Ni eq ratios …
microstructures. Existing reports on the alloy have focused on the effect of Cr eq/Ni eq ratios …
Reduction kinetics of compact hematite with hydrogen from 600 to 1050 C
Reduction of iron ores with hydrogen is a solution to replace fossil fuels. For this reason, it is
important to discuss previous discrepancies. Some previous studies suggest a rate minimum …
important to discuss previous discrepancies. Some previous studies suggest a rate minimum …
Phase field modeling of V2O5 hot corrosion kinetics in thermal barrier coatings
It has been found that the use of low grade fuels in land-based turbines in Saudi Arabia
results in the hot corrosion (Type-I) degradation due to the diffusion of a molten salt, V 2 O 5 …
results in the hot corrosion (Type-I) degradation due to the diffusion of a molten salt, V 2 O 5 …
Estimation of Grain Size and Composition in Steel Using Laser UltraSonics Simulations at Different Temperatures
A Duijster, A Volker, F Van den Berg… - Applied Sciences, 2023 - mdpi.com
The applicability of laser ultrasonics for the determination of grain size and phase
composition in steels under different temperatures was investigated. This was done by …
composition in steels under different temperatures was investigated. This was done by …
Analysis of interface migration and isothermal martensite formation for quenching and partitioning process in a low-carbon steel by phase field modeling
A modified two-dimensional phase field microelasticity model coupling the Cahn–Hillard
equation is applied to investigate the microstructural evolution of interface migration and …
equation is applied to investigate the microstructural evolution of interface migration and …
[HTML][HTML] Phase-field simulation of austenite reversion in a Fe-9.6 Ni-7.1 Mn (at.%) martensitic steel governed by a coupled diffusional/displacive mechanism
Microstructural features of austenite formation, including the growth morphologies and
partitioning of alloying elements, during reverse transformation in a Fe-9.6 Ni-7.1 Mn (at.%) …
partitioning of alloying elements, during reverse transformation in a Fe-9.6 Ni-7.1 Mn (at.%) …
Prediction and experimental verification of phase transformation plasticity
Y Huo, Y Liu, S Zuo, B Wang, Q Li - Materials Today Communications, 2023 - Elsevier
A finite element model was established to predict phase transformation plasticity (TP). Based
on the simulated results, the factors that influence TP were revealed. A formula for predicting …
on the simulated results, the factors that influence TP were revealed. A formula for predicting …
[HTML][HTML] Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels
In this work, we develop a thermodynamically consistent multi-scale model for the material
behavior of a low alloy steel taking elasto-viscoplasticity, heat conduction and phase …
behavior of a low alloy steel taking elasto-viscoplasticity, heat conduction and phase …