To meet the huge market demand for carbon fibers (CFs), great efforts have been focused
on develo** low-cost and sustainable CFs with comparable properties. Lignin, a …

Lignin remains the second abundant source of renewable carbon with an aromatic structure.
However, most of the lignin is burnt directly for power generation, with an effective utilization …

With the increasing interest in flexible self-powering energy devices, piezoelectric polymers
such as poly (vinylidene fluoride)(PVDF), PVDF-trifluoroethylene (PVDF-TrFE and poly …

For the application of lignin-based materials, it is necessary to develop simple and efficient
chemical modification strategies for lignin. In this work, the iodization modification strategy is …

The requirements for affordable feedstock, reduced production time, and cost-effective
manufacturing are some of the key challenges in carbon fiber (CF) production. Notably, the …

Lignin has been considered the main aromatic renewable biopolymer. Besides its
availability in large quantities as a major and low‐cost side product of several industries as a …

The polyacrylonitrile multifilament yarn underwent a multistep heat treatment process
including stabilization times ranging from 5 to 75 min following impregnation with a 30 …

We fabricated a water‐detecting sensor using an electrospun coaxial microfiber.
Polydiacetylene (PDA) was used as the color‐change material, and poly (ethylene …

Compared with commercial polyolefin membranes, electrospun polymeric membranes have
the advantages of higher porosity and better electrolyte wettability, but their poor mechanical …

Organic fiber-based pressure sensors are extensively used in smart wearable electronic
devices due to their remarkable combination of wearability and sensitivity. However …