Composition of corrosion products formed on Zn–Mg, Zn–Al and Zn–Al–Mg coatings in model atmospheric conditions
Formation of corrosion products on hot-dip galvanised steel (HDG), Zn–5Al, Zn–11Al–3Mg–
0.2 Si, Zn–16Mg and Zn–1.5 Al–1.5 Mg with pre-deposited NaCl was followed in humid air …
0.2 Si, Zn–16Mg and Zn–1.5 Al–1.5 Mg with pre-deposited NaCl was followed in humid air …
Initial formation of corrosion products on pure zinc and MgZn2 examinated by XPS
A corrosion behaviour study of pure phases of zinc and zinc–magnesium (MgZn 2) exposed
to humid air at 35° C for 4 days is presented. For zinc, hydroxide formation at the surface and …
to humid air at 35° C for 4 days is presented. For zinc, hydroxide formation at the surface and …
Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditions
We present a corrosion behaviour study of pure phases of zinc and zinc–magnesium
contaminated with NaCl and exposed to humid air for 30days: Zn, Mg2Zn11 and MgZn2 …
contaminated with NaCl and exposed to humid air for 30days: Zn, Mg2Zn11 and MgZn2 …
SERS activity and spectroscopic properties of Zn and ZnO nanostructures obtained by electrochemical and green chemistry methods for applications in biology and …
This work for the first time evaluates the ability of homogeneous, stable, and pure zinc oxide
nanoparticles (ZnONPs-GS) synthesized by “green chemistry”–an environmentally friendly …
nanoparticles (ZnONPs-GS) synthesized by “green chemistry”–an environmentally friendly …
Dual-ultraviolet wavelength photodetector based on facile method fabrication of ZnO/ZnMgO core/shell nanorod arrays
D Kuang, J Cheng, X Li, Y Li, M Li, F Xu, J Xue… - Journal of Alloys and …, 2021 - Elsevier
ZnO/ZnMgO core/shell nanorod arrays with a large surface-to-volume ratio and negligible
lattice mismatch are considered as a promising candidate applied in ultraviolet …
lattice mismatch are considered as a promising candidate applied in ultraviolet …
Electrochemical properties of corrosion products formed on Zn‐Mg, Zn‐Al and Zn‐Al‐Mg coatings in model atmospheric conditions
J Stoulil, T Prosek, A Nazarov, J Oswald… - Materials and …, 2015 - Wiley Online Library
The electrochemical properties of corrosion products formed under sodium chloride deposits
on zinc coatings alloyed with aluminium and magnesium have been studied using …
on zinc coatings alloyed with aluminium and magnesium have been studied using …
Solution-processed all-oxide solar cell based on electrodeposited Cu2O and ZnMgO by spray pyrolysis
The paper reports on all-solution-processed, all-oxide solar cells, based on an
electrodeposited Cu 2 O absorber. The transparent indium-doped zinc oxide (IZO) contact …
electrodeposited Cu 2 O absorber. The transparent indium-doped zinc oxide (IZO) contact …
Wastewater treatment using Mg-doped ZnO nano-semiconductors: A study of their potential use in environmental remediation
AG Oliveira, J de Lara Andrade, MC Montanha… - … of Photochemistry and …, 2021 - Elsevier
Structural, morphological, optical, and photocatalytic properties of Mg-doped ZnO nano-
semiconductors were investigated. All nanostructures exhibited spherical morphology with …
semiconductors were investigated. All nanostructures exhibited spherical morphology with …
Influence of the aqueous solution composition on the morphology of Zn 1− x Mg x O films deposited by spray pyrolysis
Tailoring the band gap of metal oxides is an attractive property for various device
applications. Zinc–magnesium-oxide (Zn1− xMgxO) is a sustainable material that allows …
applications. Zinc–magnesium-oxide (Zn1− xMgxO) is a sustainable material that allows …
Delicate Refinement of Surface Nanotopography by Adjusting TiO2 Coating Chemical Composition for Enhanced Interfacial Biocompatibility
Surface topography and chemistry have significant influences on the biological performance
of biomedical implants. Our aim is to produce an implant surface with favorable biological …
of biomedical implants. Our aim is to produce an implant surface with favorable biological …