A novel AlCrFeMoTi high-entropy alloy coating with a high corrosion-resistance in lead-bismuth eutectic alloy

J Yang, K Shi, W Zhang, Q Chen, Z Ning, C Zhu, J Liao… - Corrosion …, 2021 - Elsevier
The amorphous AlCrFeMoTi high entropy alloy (HEA) coating with near-equal molar ratio
was successfully deposited on F/M substrate by magnetron sputtering method. The coating …

Microstructure, mechanical properties and lead-bismuth eutectic corrosion behavior of FeCrAlTiNb high-entropy alloy coatings

J Yang, J Liang, G Wang, J Liao, S Qiu, W Zhang… - Corrosion …, 2023 - Elsevier
The FeCrAlTiNb high-entropy alloy coatings are fabricated by magnetron sputtering method
to prevent the lead-bismuth eutectic (LBE) corrosion of structural components used in lead …

A novel FeCrAlWx high entropy alloy coating for enhancing lead-bismuth eutectic corrosion resistance

P Zhang, Z Yao, X Wang, Y Zheng, K Cui, R Yao… - Journal of Nuclear …, 2024 - Elsevier
The use of ferritic/martensitic (F/M) steel as a container material for liquid lead–bismuth
eutectic (LBE) presents several challenges owing to the complex and diverse types of LBE …

[HTML][HTML] Corrosion behavior of Al–O coating in oxygen-saturated lead-bismuth eutectic at 550° C

T Zhang, J Ma, W Liu, C Meng, W Qi, H Wang… - Journal of Materials …, 2024 - Elsevier
The amorphous Al–O coating with a thickness of approximately 6 μm was prepared on 316 L
stainless steel using multi-arc ion plating technology to investigate the corrosion resistance …

Improved lead-bismuth eutectic corrosion resistance and mechanical properties of reactive gas pulse sputtered AlCrFeMoTi/(AlCrFeMoTi) N composite multilayered …

J Yang, L Lyu, X Qiu, M Zhou, Y Zhou, Q Li… - Journal of Nuclear …, 2022 - Elsevier
Abstract The (HEA/HEAN)-n multilayer coatings consisting of alternating (AlCrFeMoTi) N
(top) and AlCrFeMoTi layers were specially designed and successfully deposited on …

[HTML][HTML] Corrosion behavior of ZrN coated ferritic/martensitic steel in liquid lead-bismuth eutectic

C Zhu, G Liu, B Yu, Q Chen, W Zhang, J Yang… - Nuclear Materials and …, 2023 - Elsevier
The corrosion resistance of the ZrN coating deposited on ferritic/martensitic (F/M) steel by
the magnetron sputtering method was investigated in static liquid lead–bismuth eutectic …

Irradiation response of microstructure and mechanical properties of NbMoVCr multi-principal element alloy coatings

J Yang, S Lu, J Yang - Surface and Coatings Technology, 2024 - Elsevier
In this study, NbMoVCr multi-principal element alloy (MPEA) coatings with near-equal
atomic ratios were deposited onto the ferritic/martensitic (F/M) steel substrate by magnetron …

Enhanced Corrosion− Resistance of AlTiCrFeMoSi High− Entropy Alloy Coating by Magnetron Sputtering

L Zhang, Y Shi, Q Ye, B Yang - Coatings, 2023 - mdpi.com
The amorphous AlTiCrFeMoSi high entropy alloy (HEA) coating with high hardness (11.88
GPa) is successfully deposited on T91 substrate by the magnetron sputtering method. Both …

Lead-bismuth eutectic corrosion behavior of NbMoVCr refractory multi-principal element alloys coating synthesized by magnetron sputtering

J Yang, B Long, L Li, S Lu, J Yang - Journal of Nuclear Materials, 2024 - Elsevier
Nanocrystalline NbMoVCr refractory multi-principal element alloys coatings are fabricated
by magnetron sputtering technology to improve lead-bismuth eutectic (LBE) corrosion …

The infiltration behavior and chemical compatibility of molten lead-bismuth eutectic in nuclear graphite at elevated temperature

Z He, Z Liu, TJ Marrow, J Song - Journal of Nuclear Materials, 2021 - Elsevier
Six grades of commercial nuclear graphite of different microstructures (NBG-17, NBG-18,
NBG-25, IG-110, NGCT-50 and ZXF-5Q) were infiltrated with molten lead-bismuth eutectic …