A review of the fatigue failure mechanism of metallic materials under a corroded environment

NII Mansor, S Abdullah, AK Ariffin, J Syarif - Engineering Failure Analysis, 2014 - Elsevier
Assessment of the fatigue strength of pipeline steels is essential considering that the
components are subjected to cycle loads in service. This paper presents a fatigue life …

Aminoazobenzene and diaminoazobenzene functionalized graphene oxides as novel class of corrosion inhibitors for mild steel: experimental and DFT studies

RK Gupta, M Malviya, C Verma, MA Quraishi - Materials Chemistry and …, 2017 - Elsevier
In the present work aminoazobenzene (AAB) and diaminobenzene (DAB) functionalized
graphene oxide composites have been synthesized and characterized by their FT-IR, XRD …

Comparative study of synergistic inhibition of mild steel and pure iron by 1-hexadecylpyridinium chloride and bromide ions

MM Saleh, MG Mahmoud, HM Abd El-Lateef - Corrosion Science, 2019 - Elsevier
The comparison of the corrosion behavior of mild steel (MS) and pure iron (PI), and
synergistic action of 1-Hexadecylpyridinium chloride (HDPCl) and Br− ion are studied in 0.5 …

Synergistic effect in Tragacanth Gum-Ceftriaxone hybrid system as an environmentally friendly corrosion inhibitor for mild steel in acidic solutions

MR Barrodi, A Mirzaee, A Kafashan… - Materials Today …, 2023 - Elsevier
An environmental-friendly, economical, and easy to fabricate hybrid inhibitor of Tragacanth
Gum (TG) and Ceftriaxone (Cef) is introduced for corrosion prevention of mild steel in HCl …

A comparative study on the electrochemical corrosion behavior of iron and X-65 steel in 4.0 wt% sodium chloride solution after different exposure intervals

ESM Sherif - Molecules, 2014 - mdpi.com
In this work, the results obtained from studying the anodic dissolution of pure iron and API X-
65 5L pipeline steel after 40 min and 12 h exposure period in 4.0 wt% NaCl solutions at …

[HTML][HTML] Experimental investigation on the effect of heat treatment parameters on the mechanical and microstructural properties of an ASTM A860 WPHY 65 pipe fitting

M Alagheband, M Ghanbari - Results in Materials, 2023 - Elsevier
In order to optimize the heat treatment process following hot induction forming, our study
focused on investigating the impact of quenching and tempering temperature on the …

Effects of working gas on wear and corrosion resistances of cold sprayed Ti-6Al-4V coatings

NW Khun, AWY Tan, KJW Bi, E Liu - Surface and Coatings Technology, 2016 - Elsevier
In this study, the wear and corrosion resistances of cold sprayed Ti-6Al-4V (Ti64) coatings
on commercial Ti64 substrates using nitrogen (N 2) and helium (He) working gases were …

Effects of rapid solidification on the microstructure and surface analyses of laser-deposited Al-Sn coatings on AISI 1015 steel

ME Makhatha, OS Fatoba, ET Akinlabi - The International Journal of …, 2018 - Springer
Corrosion and wear phenomenon has been responsible for the gradual deterioration of
components in industrial plants. This deterioration of components results in loss of plant …

Wear and corrosion resistance of thick Ti-6Al-4V coating deposited on Ti-6Al-4V substrate via high-pressure cold spray

NW Khun, AWY Tan, W Sun, E Liu - Journal of Thermal Spray Technology, 2017 - Springer
Abstract Ti-6Al-4V (Ti64) coating with a thickness of about 9 mm was deposited on
commercial Ti64 substrate via a high-pressure cold spray process. The microstructure …

Corrosion of high strength steel in concentrated sulfuric acid pickling solutions and its inhibition by 3-amino-5-mercapto-1, 2, 3-triazole

ESM Sherif, AT Abbas, H Halfa, AM El-Shamy - International Journal of …, 2015 - Elsevier
The corrosion of high strength steel after varied exposure periods of time, namely 30, 90 and
180 min immersion in 2.0 MH 2 SO 4 pickling solution and its inhibition by 3-amino-5 …