[HTML][HTML] Biaxial experimental characterizations of soft polymers: A review

A Esmaeili, D George, I Masters, M Hossain - Polymer Testing, 2023 - Elsevier
Soft polymeric materials such as elastomers and hydrogels have played a significant role in
recent interdisciplinary research. They are subjected to large stretch and high cyclic loading …

Full-field bulge test for planar anisotropic tissues: Part I–Experimental methods applied to human skin tissue

TK Tonge, LS Atlan, LM Voo, TD Nguyen - Acta biomaterialia, 2013 - Elsevier
The nonlinear anisotropic properties of human skin tissue were investigated using bulge
testing. Full-field displacement data were obtained during testing of human skin tissues …

Measurement of true stress–strain curves and evolution of plastic zone of low carbon steel under uniaxial tension using digital image correlation

F Zhu, P Bai, J Zhang, D Lei, X He - Optics and Lasers in Engineering, 2015 - Elsevier
Three-dimensional digital image correlation has been utilized widely in many fields due to
its advantages of non-contact, full-field measurement and simplicity. Based on 3D-DIC …

Induced anisotropy by the Mullins effect in filled silicone rubber

G Machado, G Chagnon, D Favier - Mechanics of Materials, 2012 - Elsevier
This study is concerned with the experimental characterization of anisotropy induced by the
Mullins effect in a particle-reinforced silicone rubber. Experimental data concerning the …

Full-field bulge test for planar anisotropic tissues: Part II–A thin shell method for determining material parameters and comparison of two distributed fiber modeling …

TK Tonge, LM Voo, TD Nguyen - Acta biomaterialia, 2013 - Elsevier
A thin shell method is presented to analyze the results of the bulge test presented in Part I of
this paper. The method accounts for the effects of bending, which can be significant for thick …

Novel features of the Mullins effect in filled elastomers revealed by stretching measurements in various geometries

TT Mai, Y Morishita, K Urayama - Soft Matter, 2017 - pubs.rsc.org
Stretching experiments with various geometries are performed using a custom-built tensile
tester to reveal the intriguing features of the mechanical softening phenomena of filled …

Local damage detection of membranes based on Bayesian operational modal analysis and three-dimensional digital image correlation

Y Hu, W Guo, W Zhu, Y Xu - Mechanical Systems and Signal Processing, 2019 - Elsevier
It is difficult to detect local damage of a structure based on modal analysis. This paper
presents a novel local damage detection method of membranes under ambient excitation …

[HTML][HTML] Designing necks and wrinkles in inflated auxetic membranes

SP Venkata, V Balbi, M Destrade, G Zurlo - International Journal of …, 2024 - Elsevier
This article presents the potentiality of inflatable, functionally-graded auxetic membranes to
produce wrinkles and necks. We obtain elastic instabilities at desired locations in …

A novel hydraulic bulge test in hot forming conditions

A Boyer, N Demazel, J Coër, M Carin, H Laurent… - Journal of Materials …, 2023 - Elsevier
A novel hydraulic bulge test device was developed to evaluate high temperature biaxial
stress–strain curves of quenchable boron steel sheets. The work mainly focuses on the …

Adhesive connections in glass structures—part I: experiments and analytics on thin structural silicone

M Drass, G Schwind, J Schneider, S Kolling - Glass Structures & …, 2018 - Springer
The present paper describes different types of experimental test setups to determine
material properties of thin structural silicone used as laminated connections in glass …