The structural stability of ausferrite in thin-walled Austempered Ductile Iron (ADI) castings
with 5 mm wall thickness is compared to a reference casting with 25 mm wall thickness. The …

The paper presents results of testing the resistance of chain wheels made of alloyed
austempered ductile iron (ADI) with various content of retained austenite and subjected to …

Microstructure and ProPerties evaluation of ductile cast iron subjected to Hot Plastic
deforMation and aMbient teMPerature coMPression the as-cast microstructure of ductile cast …

Ductile irons were produced into different casting wall sections, that is, 25 mm, 5 mm and 3
mm. The alloys were then austenitized with the same conditions at 875° C for 2 h and …

This study is intended to examine the effects of heat treatment on the microstructural
evolution of 7055 aluminum, an area rarely reached by previous studies. Considering that …

In this work, the uniaxial stress-strain response of austenitic ductile iron at high strain rate
has been investigated. Traction tests were performed at low (0.001/s) and high rates (740/s …

The research described in this article is a fragment in the series of published works trying to
determine the applicability of new materials for parts of the mining machinery. Tests were …

The multitude of cast iron types determined by the post-processing structure translates into
an extremely wide spectrum of offered properties. Cast iron is known primarily for its …

Machining regimes and sub-regimes of dry straight finish-turningof structural austempered
ductile iron (ADI) with low cBN-content PcBN-based cutting inserts were examined. The …

The paper provides a discussion on the results of studies of the effect exerted by combined
degradation factors typical of four types of wear: abrasion, impact–abrasion, tribocorrosion …