Abstract Low-aluminium Zn-Al-Mg alloys (Al content is 1–3%) were expected to be widely
used in automotive panels due to their good coating properties and surface quality …

Corrosion of reinforcing steel affects the service life of structures. A chloride environment
exposed to reinforced concrete structures accelerates the corrosion process. Hot-dipped …

Abstract Zinc-aluminum-magnesium (Zn-Al-Mg) coatings are widely used due to their
exceptional corrosion resistance. This study focuses on Zn-3Al-3Mg coatings produced …

The selective oxidation kinetics of a series of Fe-(2-10) Mn-(0.00/0.01/0.03) Sb (at. pct) were
determined and a model was proposed for analyzing oxide growth during intercritical …

The oxide layer and ternary eutectic of Zn–6Al–3Mg alloy coating have an important effect
on its corrosion behavior and corrosion resistance, but the influence of oxide layer on the …

The paper presents the impact of the drawing method on the microstructure and corrosion
resistance of galvanized steel wires. The microstructural tests confirmed that, in the drawing …

Faced with the raw material crisis in Zn resources, researchers are facing the challenge of
develo** technology for producing zinc coatings that are thinner than those that have …

The FeCoNiCrMo0. 2 high entropy alloy coatings were deposited on BS960 high strength
steel by plasma spraying method with four different current intensities (250 A, 350 A, 450 A …

This paper evaluates the amount of KMnO4 in simulated concrete pore solution (pH 12.8) on
the corrosion behaviour of hot-dip galvanized steel (HDG). In the range of used MnO4−(10 …

In the present research, Sb surface segregation kinetics for Fe-(0.01/0.03) Sb and Fe-2Mn-
(0.01/0.03) Sb at.% alloys were determined based on the modified Darken model and linear …