Thin-walled structures are commonly utilized in aerospace and aircraft structures, which are
prone to buckling under axial compression and extremely sensitive to geometric …

This analysis investigates short thin-walled channel-section columns made of CFRP
laminate. Columns with four multi-ply composite layups were tested, each layup having 8 …

Thin-walled beams made of laminated composite materials are increasingly used in any
engineering branch where structural weight is one of the major aspects in the design …

The objective of this study was to investigate the influence of eccentric compressive load on
the buckling, post-buckling and load-carrying capacity of thin-walled top-hat cross-section …

The aim of this study is to investigate the influence of manufacturing on the buckling and
post-buckling behaviour of thin-walled, columns made from CFRP. Static compression was …

Cylindrical shell panels are commonly used for the lightweight design of thin-walled
structures in the aerospace engineering. In this work, the snap-through buckling of …

This paper explores the effect of different modelling strategies to represent geometrical
imperfections and joints in flat thin-walled stiffened panels during buckling and post …

An imperfection sensitivity analysis for the nonlinear post-buckling behavior of functionally
graded (FG) porous micro-tubes is performed in this research. The case of geometrically …

Due to the high specific strength and stiffness, thin-walled shells are widely used in
aerospace engineering structures. However, along with the increase of the structure size or …

The paper is devoted to the effect of some geometrical imperfections on the critical buckling
load of axially compressed thin-walled I-columns. The analytical formulas for the critical …