Corrosion testing of bioabsorbable metallic materials is important at material selection stage
and for understanding their degradation mechanisms. A large variety of different corrosive …

Magnesium alloys exhibit superior biocompatibility and biodegradability, which makes them
an excellent candidate for artificial implants. However, these materials also suffer from lower …

Electrochemical impedance spectroscopy measurements were performed to study the
evolution of surface condition, which related to the high frequency time constant of Mg, in …

Severe corrosion of Mg and Mg alloys is a major issue hindering their wider application in
transportation industry, medical implants and aqueous batteries. Previously, no Mg-based …

Bio-absorbable metals have been proposed to overcome the limitations of permanent
implant materials, particularly the risk of chronic inflammation and secondary surgery for …

The composite calcium-phosphate coating on MA8 Mg alloy consisting of the inorganic
porous basis sealed with polymer is suggested. To control the alloy resorption kinetics, the …

Pure Mg boasting a relatively small corrosion rate is a potential biodegradable metal
material for implants. However, its degradation behavior in the complex physiological …

Water purification through photocatalysis is the most important requirement due to the
increased health, environmental and energy conservation concerns. Metal oxide …

Simulated body fluid (SBF) is a common medium for in vitro corrosion analysis. The
individual influence and synergy of the SBF components on the corrosion of commercially …

Low anodic efficiency of metallic Mg, which results in low discharge capacity and specific
energy density, hinders the wider application of aqueous primary Mg batteries. In this work …