Machinability and tool wear mechanism of Duplex stainless steel–A review
PS Gowthaman, S Jeyakumar, BA Saravanan - Materials Today …, 2020 - Elsevier
This paper reviews the machining characteristics and tool wear mechanism of Duplex
stainless steel. The Duplex alloy is a combination of Cr-Ni-Mo-Fe based alloys, it consist an …
stainless steel. The Duplex alloy is a combination of Cr-Ni-Mo-Fe based alloys, it consist an …
Application of surface modification techniques during hard turning: Present work and future prospects
Hard turning process involves machining of materials of very high hardness, and thus, the
process is associated with high machining forces resulting in the generation of a large …
process is associated with high machining forces resulting in the generation of a large …
Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition
M Mia - Measurement, 2017 - Elsevier
Cryogenic cooling atmosphere in machining is usually accredited as clean cutting condition.
Works in literature are mostly focused on external implementation of cryogenic; thereby not …
Works in literature are mostly focused on external implementation of cryogenic; thereby not …
The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning
Demand for stainless steels is rapidly increasing, especially in the oil and gas industries.
Stainless steel offers a number of key advantages such as high tensile strength, toughness …
Stainless steel offers a number of key advantages such as high tensile strength, toughness …
Effects of cutting fluids with nano-silver and borax additives on milling performance of aluminium alloys
The development of tribological properties of cutting fluids is important to ensure cutting
efficiency in metal cutting processes. It is expected that the nano-cutting fluids obtained …
efficiency in metal cutting processes. It is expected that the nano-cutting fluids obtained …
Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling
The influence of nanolayer AlTiN/TiN and multilayer nanocomposite TiAlSiN/TiSiN/TiAlN
hard coatings on the wear behavior and cutting performance of carbide cutting tools was …
hard coatings on the wear behavior and cutting performance of carbide cutting tools was …
Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool
Q An, C Wang, J Xu, P Liu, M Chen - … Journal of Refractory Metals and Hard …, 2014 - Elsevier
Abstract High strength steel 30Cr3SiNiMoVA (30Cr3) is usually used to manufacture the key
parts in aviation industry owing to its outstanding mechanical properties. However, 30Cr3 …
parts in aviation industry owing to its outstanding mechanical properties. However, 30Cr3 …
Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling
In this study, micro-milling of AISI 304 stainless steel with ball nose end mill was conducted
using Taguchi method. The influences of spindle speed, feed rate and depth of cut on tool …
using Taguchi method. The influences of spindle speed, feed rate and depth of cut on tool …
Performance analysis and comparative assessment of nano-composite TiAlSiN/TiSiN/TiAlN coating in hard turning of AISI 52100 steel
The present study investigates the machining performance of coatings deposited by cathode
arc evaporation (CAE) and DC reactive magnetron sputtering (DCRMS) process with …
arc evaporation (CAE) and DC reactive magnetron sputtering (DCRMS) process with …
Experimental studies on cryogenic CO2 face milling of Inconel 625 superalloy
In this study, face milling operation was carried out on an Inconel 625 superalloy. About 27
experiments (L27) were conducted using Design of Experiments (DOE), which comprised …
experiments (L27) were conducted using Design of Experiments (DOE), which comprised …