High temperature solid oxide electrolysis for green hydrogen production
Global warming and energy crises have motivated the development of renewable energy
and its energy carriers. Green hydrogen is the most promising renewable energy carrier and …
and its energy carriers. Green hydrogen is the most promising renewable energy carrier and …
[HTML][HTML] Electrochemical aspects of interconnect materials in PEMFCs
Abstract Proton Exchange Membrane Fuel Cell (PEMFC) is one of the promising
technologies for generating electricity due to high energy density, environmental …
technologies for generating electricity due to high energy density, environmental …
Low temperature nitriding of metal alloys for surface mechanical performance
Metallic alloys are, by essence, ductile and stiff and can support loads without sudden
rupture. This ductility becomes a disadvantage when applications require wear resistance …
rupture. This ductility becomes a disadvantage when applications require wear resistance …
[HTML][HTML] A new MAX phases-based electroconductive coating for high-temperature oxidizing environment
In the paper, results of variations of structure, oxidation resistance, and electrical conductivity
of novel MAX-phase composite coating are presented. The characteristics of highly dense Ti …
of novel MAX-phase composite coating are presented. The characteristics of highly dense Ti …
Corrosion resistance of AISI 442 and AISI 446 ferritic stainless steels as a support for PEMWE bipolar plates
Cost reduction in bipolar plates in proton exchange membrane water electrolyzers has
previously been attempted by substituting bulk titanium with austenitic stainless steels …
previously been attempted by substituting bulk titanium with austenitic stainless steels …
Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices
Inkjet printing technology was employed for the application of protective layer coatings in
SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on …
SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on …
Nitrogen-induced optimization of corrosion resistance for nanocrystalline soft magnetic Fe-Zr-B alloys
H Ma, W Wang, Y Liu, X Liu, A He, Y Dong… - Journal of Materials …, 2024 - Elsevier
The poor corrosion resistance restricts the industrial applications of nanocrystalline soft
magnetic Fe-Zr-B alloys. We reported a facile plasma-nitriding surface process to enhance …
magnetic Fe-Zr-B alloys. We reported a facile plasma-nitriding surface process to enhance …
Development of Multi-Functional Coating for Ferritic Steels Using Cathodic Plasma Electrolytic Nitriding
Cathodic plasma electrolytic nitriding (c-PEN) technique has been utilized to modify a low-
alloy ferritic steel (2.25 Cr-1Mo) surface and assess the effect of the c-PEN layer on …
alloy ferritic steel (2.25 Cr-1Mo) surface and assess the effect of the c-PEN layer on …
Effect of element N on microstructure and tribological properties of CoCrFeNiV alloy at severe temperature
P Qiu, W Wang, X Zhang, M Niu, J Cheng - Tribology International, 2025 - Elsevier
In this study, CoCrFeNiV non-equiatomic high entropy alloys (HEAs) with varying N content
were prepared using vacuum hot-press sintering. The effects of N content on the alloy's …
were prepared using vacuum hot-press sintering. The effects of N content on the alloy's …
[HTML][HTML] Insight into nitriding behavior and corrosion mechanism in 17-4PH steel: The influence of nanocrystalline structure
D Liu, D Liu, Y Wu, J Yang, X Xu, M Li, S Li… - Journal of Materials …, 2023 - Elsevier
In this study, the influence of nanocrystalline structure on the plasma nitriding (PN) behavior
of 17-4PH steel and corresponding corrosion mechanisms under different treatments were …
of 17-4PH steel and corresponding corrosion mechanisms under different treatments were …