Effervescent atomization
SD Sovani, PE Sojka, AH Lefebvre - Progress in energy and combustion …, 2001 - Elsevier
Effervescent atomization is a method of twin-fluid atomization that involves bubbling a small
amount of gas into the liquid before it is ejected from the atomizer. The technique of bubbling …
amount of gas into the liquid before it is ejected from the atomizer. The technique of bubbling …
Gel fuels: preparing, rheology, atomization, combustion
D Glushkov, K Paushkina, A Pleshko - Energies, 2022 - mdpi.com
The review presents the results of experimental and theoretical studies obtained in recent
years within the framework of the main areas of research of gel fuels: choice of component …
years within the framework of the main areas of research of gel fuels: choice of component …
Cavitation in real-size multi-hole diesel injector nozzles
A production six-hole conical sac-type nozzle incorporating a quartz window in one of the
injection holes has been used in order to visualize the flow under cavitating flow conditions …
injection holes has been used in order to visualize the flow under cavitating flow conditions …
Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size
This study focuses on the low-pressure spraying of viscous liquids (μ= 60, 147 and 308 mPa
s) using four types of internal-mixing twin-fluid atomizers. We compare two well-known …
s) using four types of internal-mixing twin-fluid atomizers. We compare two well-known …
Low-pressure twin-fluid atomization: Effect of mixing process on spray formation
The present work comparably examines four different twin-fluid atomizers operated under
the same operating conditions. Spray formation was examined by several approaches. The …
the same operating conditions. Spray formation was examined by several approaches. The …
Investigation of cavitation in a vertical multi-hole injector
An enlarged transparent model of a six-hole vertical diesel injector has been used to allow
visualization of the flow at Reynolds and cavitation numbers matching those of real size …
visualization of the flow at Reynolds and cavitation numbers matching those of real size …
Internal two-phase flow and spray characteristics of outside-in-liquid twin-fluid atomizers
Despite its wide industrial applications, the internal-mixing twin-fluid atomization suffers a
major problem of spray unsteadiness. This work links the flow characteristics inside a newly …
major problem of spray unsteadiness. This work links the flow characteristics inside a newly …
Liquids' atomization with two different nozzles: Modeling of the effects of some processing and formulation conditions by dimensional analysis
S Mandato, E Rondet, G Delaplace, A Barkouti… - Powder technology, 2012 - Elsevier
Liquid atomization is a largely widespread unit operation. The disintegration of a liquid into
droplets depends on the nature of the nozzle, on the process parameters as well as …
droplets depends on the nature of the nozzle, on the process parameters as well as …
Experimental study on the spray steadiness of an internal-mixing twin-fluid atomizer
G Li, C Li - Energy, 2021 - Elsevier
Liquid breakup intensity in the near-nozzle region and droplet size fluctuations at different
downstream positions of an internal-mixing twin-fluid (IMTF) atomizer were studied by using …
downstream positions of an internal-mixing twin-fluid (IMTF) atomizer were studied by using …
Development of an effervescent atomizer for industrial burners
J Jedelsky, M Jicha, J Slama, J Otahal - Energy & Fuels, 2009 - ACS Publications
The present work is conducted with the purpose of develo** an effervescent atomizer for
industrial burners that will generate a fine and steady spray in large turn-down ratio. The …
industrial burners that will generate a fine and steady spray in large turn-down ratio. The …