Cold spray is an effective solid-state process for the fabrication of metal matrix composites
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …

High modulus of about 1 TPa, high thermal conductivity of over 3000 W/mK, very low
coefficient of thermal expansion (CTE), high electrical conductivity, self-lubricating …

A 1 wt% carbon nanotube‑aluminum (CNT-Al) metal matrix composite (MMC) powder was
prepared using a polymer pyrolysis chemical vapor deposition (PP-CVD) coupled high …

In this work, we have demonstrated multi walled carbon nanotubes (MWCNTs) based CO 2
gas sensor using a reliable and low cost gel-cast method with MWCNT concentration of 0.6 …

An alumina-based nanocomposite is fabricated through the addition of secondary
nanophase material to an alumina matrix to alter and tailor the properties of alumina. The …

Single-walled carbon nanotubes (SWCNTs) incorporated in indium tin oxide (ITO) were
developed to fabricate transparent conductive thin films via a sol–gel spin coating technique …

In the present work, Al2O3–multiwalled carbon nanotube (MWCNT) composites have been
developed by both conventional sintering and spark plasma sintering (SPS) and their …

A large amount of primary energy is lost due to friction, and the study of new additive
materials to improve friction performance is in line with the concept of low carbon. Carbon …

In this study, Al 2 O 3-based nanocomposites reinforced with multiple nano-materials,
namely zirconia (ZrO 2), graphene (GN) and carbon nanotubes (CNTs) were processed to …

Tribological phenomena such as wear and friction cause huge loss of material and
resources, mechanical failures, energy consumption, CO 2 emissions, and financial loss …