A critical review of cold-formed built-up members: Developments, challenges, and future directions
The use of cold-formed members in structural engineering is increasing because of their
considerable structural and environmental advantages, such as low weight, ease and speed …
considerable structural and environmental advantages, such as low weight, ease and speed …
Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members
Traditional member-based two-step design approaches included in current structural codes
for steel structures, as well as more recent system-based direct-design alternatives, require …
for steel structures, as well as more recent system-based direct-design alternatives, require …
[HTML][HTML] Description of stress–strain curves for stainless steel alloys
There is a wide variety of stainless steel alloys, but all are characterized by a rounded stress–
strain response with no sharply defined yield point. This behaviour can be represented …
strain response with no sharply defined yield point. This behaviour can be represented …
Design of cold-formed steel built-up columns subjected to local-global interactive buckling using direct strength method
This paper presents the structural behavior of doubly-symmetric built-up cold-formed steel
(CFS) columns that fail in local-global (flexural-torsional) interactive buckling modes. The …
(CFS) columns that fail in local-global (flexural-torsional) interactive buckling modes. The …
Testing and numerical modelling of lean duplex stainless steel hollow section columns
Stainless steels are employed in a wide range of structural applications. The austenitic
grades, particularly EN 1.4301 and EN 1.4401, and their low-carbon variants EN 1.4307 and …
grades, particularly EN 1.4301 and EN 1.4401, and their low-carbon variants EN 1.4307 and …
Design of cold-formed steel built-up closed section columns using direct strength method
Structural behavior of Cold-formed Steel (CFS) face-to-face connected built-up closed cross-
section columns is investigated in the present study. The CFS built-up columns are designed …
section columns is investigated in the present study. The CFS built-up columns are designed …
Tests and design of built-up section columns
Built-up sections are increasingly used as structural elements in the cold-formed steel (CFS)
industry. They are composed of two or more component sections connected by discrete …
industry. They are composed of two or more component sections connected by discrete …
Buckling of ferritic stainless steel members under combined axial compression and bending
Experimental and numerical studies of ferritic stainless steel beam-columns have been
carried out and are described in this paper. Two cross-section sizes were considered in the …
carried out and are described in this paper. Two cross-section sizes were considered in the …
Experimental investigation of local-overall interaction buckling of stainless steel lipped channel columns
The paper describes an experimental programme carried out at the University of Sydney to
study the interaction of local and overall buckling in stainless steel lipped channels under …
study the interaction of local and overall buckling in stainless steel lipped channels under …
Experimental study and numerical simulation on the seismic behavior of diagonally stiffened stainless steel plate shear walls under low cyclic loading
Y Wu, S Fan, Y Guo, S Duan, Q Wu - Thin-Walled Structures, 2023 - Elsevier
To expand the application scope of stainless steel, especially in the seismic resistance, a
series of systematic studies from material to members were carried out. A mechanical …
series of systematic studies from material to members were carried out. A mechanical …