The interaction mechanisms between polyacrylic acid (PAA) and Alloy 800 were
investigated. Alloy 800 formed a bilayer oxide structure in all conditions, with an outer layer …

The effect of polyacrylic acid (PAA) on the corrosion behavior of Alloy 690 in simulated
pressurized water reactor secondary water was investigated. The duplex oxide film structure …

Secondary circuit water chemistry control is vital for the safe operation of nuclear power
plants. Polyacrylic acid (PAA) is used in the secondary circuit water system to reduce the …

The oxidized surface of stainless steel 304 was studied after being subjected to constant
tensile load creep tests in water at temperatures of 200, 315 and 450° C and for 24 h at a …

The corrosion behavior of Alloys 690 and 800 was investigated in high-temperature water
containing dissolved oxygen (DO) and polyacrylic acid (PAA). DO caused Cr dissolution as …

Systematical corrosion tests of austenitic stainless steel 316L exposed to sewage sludge
SCWO (supercritical water oxidation) were conducted in a batch stirred reactor with …

The objective of this study was to investigate the effect of the incorporation of 2, 4 or 6 wt% of
amorphous nano-or micro-silica (Aerosil® OX 50 or Aeroperl® 300 Pharma (Evonik …

Nuclear reactors face extended outages due to Steam Generator (SG) tube failure. Study
was carried out to evaluate Poly (acrylic acid-co-maleic acid)[PAMA], as polymeric …

The effect of polyacrylic acid on the corrosion behavior of carbon steel and magnetite was
investigated in alkaline aqueous solutions at 25° C using potentiodynamic polarization and …

The present paper aims at determining and understanding the curative effect and action
mode of polyacrylic acid (PAA) dispersant on magnetite (Fe 3 O 4) deposits on Inconel tubes …