Over the past years, persulfate (PS) is widely applied due to their high versatility and efficacy
in decontamination and sterilization. While treatment of organic chemicals, remediation of …

Chlorinated hydrocarbons (CHCs) are often used in industrial processes, and they have
been found in groundwater with increasing frequency in recent years. Several typical CHCs …

In this study, batch experiments were conducted to examine the enhanced reactivity of
microscale Fe/Cu bimetallic particles (mFe/Cu) with persulfate (PS) for p-nitrophenol (PNP) …

Graphite is one of the most widely used anode materials in lithium‐ion batteries (LIBs). The
recycling of spent graphite (SG) from spent LIBs has attracted less attention due to its limited …

To efficiently leach Pb from Zn leaching residue, an ultrasonic-assisted one-stage leaching
process was developed and compared with a two-stage leaching process under …

In this work, extraction of lead from Electrolytic Manganese Anode Mud (EMAM) by
microwave coupled ultrasound was studied. The results showed that microwave roasting …

This work explores the challenges associated with studying the microstructural properties of
REBa 2 Cu 3 O 7-x (RE= rare-Earth, REBCO)-based coated conductors by transmission …

The recovery of waste cupronickel not only can solve related environmental concerns but
also facilitates the separation of valuable metals and reduces extra exploitation of natural …

A method was developed to determine copper and zinc simultaneously in brass sample
using a multiple ion-selective electrode array system and multivariate calibration techniques …

Hydrometallurgical unit operations are typically used to recover palladium (Pd) from its ores
and secondary resources with high selectivity owing to their low energy consumption, cost …