Microplastics (MPs) have been detected globally in the marine environment. MP polymers of
various kinds have different toxicity potentials when decomposed into monomers. Also, the …

Porous carbon nanosheets with high specific surface area have become the most promising
electrode materials for supercapacitor, but their high pore volume leads to relatively low …

For the first time, we incorporated mesoporous micro-silica (5 μm, pore size= 50 nm) as a
filler in epoxy resin aiming to enter polymer into the pore of the silica. As expected, the …

In order to obtain the mechanisms of the pyrolysis reaction that poly (lactic acid)(PLA) gives
lactide in the presence of Sn, the four types of low molecular weight PLAs (L-PLA) with …

Particleboard (PB), medium density fibreboard (MDF), oriented strand board (OSB) and
plywood (PW), the most common products of wood panel industry, are produced by means …

Almond shell-modified urea–formaldehyde resins (AUF) were prepared in this study. The
optimal addition amount of almond shells was selected by formaldehyde emission and wet …

This mini-review deals with the state of the art research in the field of condensed phase
kinetics in particular regard to prediction of reaction mechanisms. Determination of …

Urea-formaldehyde (UF) resin was modified by semi-liquefied bamboo to prepare plywood
adhesive. The unliquefied bamboo fiber solid becomes the filler or putty in the bonding …

Urea–formaldehyde (UF) resins are widely used over the world as an adhesive, principally
in the civil construction, but its use leads to formaldehyde emissions when exposed to higher …

This study introduces a straightforward and cost-effective route to elaborate a thermally
reduced graphene oxide film (R-GOF) at 350° C under ambient atmosphere, followed by the …