Emission of volatile organic compounds (VOCs) has resulted in various environmental
issues. Therefore, development of effective VOC removal technology is essential for …

This paper reports the generation and characterization of monometallic (palladium (Pd),
platinum (Pt), gold (Au), and silver (Ag) from electrodes of the same material) and bimetallic …

Flexible thermoelectric generators (TEGs) can provide uninterrupted, green energy from
body-heat, overcoming bulky battery configurations that limit the wearable-technologies …

Technical plasmas have a wide range of industrial applications. The Encyclopedia of
Plasma Technology covers all aspects of plasma technology from the fundamentals to a …

Nanostructured Indium (III) oxide (In2O3) films deposited by low temperature pulsed electron
deposition (LPED) technique on customized alumina printed circuit boards have been …

In this paper, a retarding potential energy analyzer (RPEA) specific for pulsed electron
beams within the pressure range of tens of mTorr is developed and used to investigate the …

The channel spark discharge was used as a high-current density (up to 30 kA/cm 2)
relatively low-energy (< 20 keV) electron beam source in a pulsed plasma deposition (PPD) …

Parameters of a modified pulsed channel spark discharge (CSD), operating at a repetition
rate up to 100 Hz at Ar gas pressures of 10− 3 and 10− 4 Torr and of the generated electron …

A pulsed electron beam accelerated at 12 kV with a duration of 40 μs per pulse is obtained
from a Penning discharge with a hollow anode and two cathodes. The electrons are …

In this paper, a numerical simulation model was developed to simulate the helium plasma in
a cylindrical Microhollow cathode based on a two‐dimensional, time‐dependent and self …