Nanomaterials are at the leading edge of the emerging field of nanotechnology. Their
unique and tunable size-dependent properties (in the range 1–100 nm) make these …

Nanosize cerium-zirconium solid solution (CZO) with a special fluorite structure has received
an increasing research interest due to their remarkable advantages such as excellent …

The formation of methane as the undesired side product is one of the major issues in the
water–gas shift (WGS) reaction, particularly for nickel-based catalysts. A detailed study of Ni …

A rapid, clean, and continuous hydrothermal route to the synthesis of ca. 14 nm indium oxide
(In2O3) nanoparticles using a superheated water flow at 400° C and 24.1 MPa as a …

A green, rapid and continuous hydrothermal flow synthesis (CHFS) route has been used to
produce highly stable and active novel ceria–zirconia oxide/graphene nanocomposite …

In the dry reforming of methane (DRM), the oxygen vacancies on the surface of Ni/CeO 2
catalyst play an important role in CO 2 activation, catalytic performance and coke resistance …

Ceria–zirconia solid solution is a very important material in three-way catalysts for
automotive emission control. High oxygen storage capacity (OSC) and thermally stable Ce0 …

Nano-zirconia has been widely applied due to its excellent physical and chemical properties
(eg, high strength, corrosion resistance, oxygen ion conductivity). Existing preparation …

Supercritical hydrothermal synthesis is a promising technology to produce nano-ZrO 2 due
to its simple craft, short reaction time and low cost. In this paper, nano-ZrO 2 particles with an …

Highly monodispersed CuO nanoparticles (NPs) were synthesized via continuous
hydrothermal flow synthesis (CHFS) and then tested as catalysts for CO2 hydrogenation …