Effects of nanoparticles on the morphology of immiscible polymer blends–challenges and opportunities
Adding small amounts of nanoparticles is an effective way to manipulate the morphology of
immiscible polymer blends. However, although diffusely recognized, the potential of such an …
immiscible polymer blends. However, although diffusely recognized, the potential of such an …
Challenges in liquid‐phase exfoliation, processing, and assembly of pristine graphene
Recent developments in the exfoliation, dispersion, and processing of pristine graphene (ie,
non‐oxidized graphene) are described. General metrics are outlined that can be used to …
non‐oxidized graphene) are described. General metrics are outlined that can be used to …
Nanoparticle-induced co-continuity in immiscible polymer blends–A comparative study on bio-based PLA-PA11 blends filled with organoclay, sepiolite, and carbon …
Different amounts of organoclay, sepiolite, and carbon nanotubes are added to an
immiscible blend of poly (lactic acid)(PLA) and polyamide 11 (PA11) with drop-matrix …
immiscible blend of poly (lactic acid)(PLA) and polyamide 11 (PA11) with drop-matrix …
Tuning the morphology of HDPE/PP/PET ternary blends by nanoparticles: a simple way to improve the performance of mixed recycled plastics
Due to a very low mixing entropy, most of the polymer pairs are immiscible. As a result,
mixing polymers of different natures in a typical mechanical recycling process leads to …
mixing polymers of different natures in a typical mechanical recycling process leads to …
Double percolation of multiwalled carbon nanotubes in polystyrene/polylactic acid blends
Selective localization of multi-walled carbon nanotubes (MWCNT) in polylactic
acid/polystyrene (PLA/PS) bicontinuous blends is presented in this work. A masterbatch of …
acid/polystyrene (PLA/PS) bicontinuous blends is presented in this work. A masterbatch of …
[HTML][HTML] A simple rheological method for the experimental assessment of the fiber percolation threshold in short fiber biocomposites
The identification of the percolation threshold (Φ c) in short fiber composites is a challenging
problem in Composite Science. Above Φ c the fibers form a continuous network that causes …
problem in Composite Science. Above Φ c the fibers form a continuous network that causes …
Tailoring the properties of PP/PA6 nanostructured blends by the addition of nanosilica and compatibilizer agents
JK Palacios, A Sangroniz, JI Eguiazabal… - European Polymer …, 2016 - Elsevier
The effectiveness of combining silica nanoparticles (NS) and polypropylene grafted with
maleic anhydride (PPgMA) to stabilize the morphology and improve the properties of an …
maleic anhydride (PPgMA) to stabilize the morphology and improve the properties of an …
Correlation between morphology, rheological behavior, and electrical behavior of conductive cocontinuous LLDPE/EVA blends containing commercial graphene …
In this work, cocontinuous blends of linear low density polyethylene/ethyl vinyl acetate
containing graphene (GN) have been studied. Although mass-produced GN grade prepared …
containing graphene (GN) have been studied. Although mass-produced GN grade prepared …
Linear viscoelasticity of PP/PS/MWCNT composites with co-continuous morphology
In this work, a study of the linear viscoelastic properties of co-continuous polypropylene/
polystyrene blends filled with multiwall carbon nanotubes (MWCNTs) is presented. The YZZ …
polystyrene blends filled with multiwall carbon nanotubes (MWCNTs) is presented. The YZZ …
Interfacial crowding of nanoplatelets in co-continuous polymer blends: Assembly, elasticity and structure of the interfacial nanoparticle network
The sequence of events which leads to the interfacial crowding of plate-like nanoparticles in
co-continuous polymer blends is investigated through a combination of morphological and …
co-continuous polymer blends is investigated through a combination of morphological and …