Since the 1980s, vacuum hot rolling has been developed to fabricate the stainless steel clad
plates by the Iron and Steel Institute of Japan. Herein, hot rolling is a widely used solid-state …

The stainless-clad (SC) bimetallic steel combines the excellent corrosion resistance of
stainless steel with the high strength and low cost of conventional mild (CM) steel. It …

Ti/steel clad plates have good corrosion resistance and lower titanium cost. However, the
low interfacial bond strength severely restricts their wide application. In this study, a new …

Vacuum roll cladding (VRC) based on friction stir welding (FSW) is applied to prepare
aluminum alloy thick plates, and the effect of rolling reduction ratios (60%, 70%, 80%) on the …

The novel composite material MoS 2-Al 2 O 3 nanoparticles were synthesized via mussel-
inspired chemistry of dopamine. Hot rolling lubrication performance of MoS 2-Al 2 O 3 in …

The interface oxides' morphologies, compositions and structures of 316 L/Q235 stainless
steel clad plate with different vacuum degrees of 10 5, 400, 10 and 10− 2 Pa were …

Realizing the continuous forming and metallurgical bonding in bimetallic cladding tubes with
high-strength and corrosion-resistance is the key bottleneck to be solved urgently. In this …

Abstract Three-layered Ti/Cu/Ti clad materials fabricated by cold roll-bonding process and in
the following underwent heat treatment cycles. Microstructure evolution and mechanical …

The advantages of stainless steel/carbon steel clad plates include corrosion resistance, low
cost, good ductility, etc., which are usually used as chief load-bearing components. But the …

Stainless steel/carbon steel (SS/CS) laminated composites were prepared by liquid-solid
(LS) bonding followed by hot rolling under different reduction rates, and the microstructure …