Ethanol kinetic model development and validation at wide ranges of mixture temperatures, pressures, and equivalence ratios

A Zyada, O Samimi-Abianeh - Energy & Fuels, 2019‏ - ACS Publications
A new detailed kinetic model of ethanol with 107 species and 1795 reactions was
developed using a reaction mechanism generator and extensively validated against …

Methane laminar flame speed measurement at high gas temperature using rapid compression machine-flame (RCM-flame)

T Goyal, O Samimi-Abianeh - Industrial & Engineering Chemistry …, 2022‏ - ACS Publications
An outwardly expanding spherical flame speed has been studied using a constant volume
chamber, a spherical bomb, and a shock tube. However, the literature reports very few …

Experimental study on initiation and propagation behavior of propane/oxygen/nitrogen detonation wave

S Liu, X Chen, N Zhao, H Zheng, X Jia - Fuel, 2021‏ - Elsevier
In this experiment, detonation cell sizes of propane/oxygen/nitrogen under different initial
conditions was measured, including the ratio of nitrogen to oxidant, equivalence ratio and …

Measurement and Simulation of Autoignition-Assisted Flame Speed of N-Heptane Mixture at Elevated Gas Temperature

T Goyal, O Samimi-Abianeh - Industrial & Engineering Chemistry …, 2023‏ - ACS Publications
Laminar flame speed and autoignition are two fundamental characteristics of a
hydrocarbon's combustion. These two characteristics are extensively studied due to their …

An experimental investigation of flame and autoignition behavior of propane

MA Burnett, MS Wooldridge - Combustion and Flame, 2021‏ - Elsevier
Autoignition delay time data are one important means to develop, quantify, and validate
fundamental understanding of combustion chemistry at low temperatures (T< 1200 K) …

Laminar flame properties correlations for H2/C3H8 mixtures at high temperature and pressure conditions

HA Yepes, C Slunecka, A Salazar, B Windom… - Fuel, 2024‏ - Elsevier
Laminar burning velocity (SL) and flame thickness correlations for H 2, C 3 H 8 and their
mixtures at autoignition conditions for the study of ignition regime were developed. The …

Measuring the adiabatic ignition delay of n-pentane mixture using rapid compression machine

JA Piehl, O Samimi-Abianeh - Journal of Thermal Science, 2020‏ - Springer
Recent combustion research has focused on low temperature combustion to meet engine
emission regulations and to advance the development of low temperature homogenous …

Effect of diluents on the autoignition of propane mixtures using a rapid compression machine

O Samimi-Abianeh, JA Piehl, A Zyada… - Energy & …, 2019‏ - ACS Publications
The autoignition process of different propane mixtures was studied to determine how the
diluent choice (helium and argon/nitrogen) affects the ignition delay, the production of …

Measurement and Simulation of n-Heptane Mixture Autoignition

M Molana, T Goyal… - Industrial & Engineering …, 2021‏ - ACS Publications
The autoignition of n-heptane mixtures was studied over a wide range of conditions using a
rapid compression machine (RCM). The experiments were performed using several n …

Rapid compression machine ignition delay time measurements under near-constant pressure conditions

M Molana, JA Piehl, O Samimi-Abianeh - Energy & Fuels, 2020‏ - ACS Publications
This work presents and validates a new methodology that determines the adiabatic ignition
delay of a hydrocarbon-based fuel using several nonadiabatic ignition delay measurements …