Metal powders are highly practical in many applications such as solders, 3D printing, dental
activities, etc. Atomization of molten metals and alloys is one of the common mechanisms for …

High temperature strength of Al–Fe–V–Si alloys due to quaternary silicide dispersoids in
their microstructures has been well documented in the literature. In those works, these …

This study examined the performance of abrasive jet polishing (AJP) on SKD61 mold
surfaces using wax-coated silicon carbide (SiC) abrasives fabricated by gas atomization …

The effect of cerium on Al–Zn alloys with T6 and T5 treatments was investigated for
mechanical and impact properties. Alloys were prepared by controlled melting and casting …

The paper examines the phase composition of a number of high-temperature aluminum
alloys formed in rapid solidification. The main strengthening phases and associated phase …

The strength and plasticity of a series of rapidly solidified high-temperature aluminum alloys
determined in tensile tests are analyzed over a wide temperature range. The properties of …

Advanced Cu‐40mass% Zn alloys with a high tensile strength and excellent machinability
have been developed via a powder metallurgy (P/M) process. They are environmentally …

Abstract Sintered Cu-40mass% Zn (brass) alloys with a high tensile strength and excellent
machinability have been developed via a powder metallurgy (P/M) process. They are …

In the present paper, the structure and properties of a Al–Cr–Fe–Ti alloy produced by
powder metallurgy are described. An initial rapidly solidified powder alloy was prepared by …

The paper examines the effect of chemical and structural inhomogeneity formed in the rapid
crystallization of aluminum powders on the structure and mechanical properties of alloys …