This document reviews the recent research work on the mechanical properties of 6xxx series
aluminium alloys at strain rates in the range of∼ 10− 5–10 5 s− 1, and crashworthiness of …

This study evaluates literature on mechanical response of 6xxx series aluminium alloys
under dynamic loads (projectile impacts). It is mainly concerned with the ballistic behaviour …

The present work investigates the impact behaviour of Al 2024-T3 alloy using FEM analysis
performed through LS DYNA software. Johnson–Cookvisco-plastic model is used to study …

The perforation behavior of 2-mm thick CrMnFeCoNi high-entropy alloy plates is
investigated via ballistic impact experiments using spherical stainless steel 304 projectiles …

AA 6082-T6 extruded flat bars were reduced to four different thicknesses, viz., 2 mm, 3 mm, 4
mm and 5 mm, using room temperature rolling and subsequently solution treated to obtain …

The demand for light-weight materials, exhibiting superior strength and higher toughness,
has increased attention to cryogenic temperature rolling as it produces bi-modal …

Recent research has shown that optimizing recycling process parameters enhances the
mechanical properties of recycled aluminium alloys via hot press forging. However, there is …

Abstract Al-Si-Mg alloys possess superior forgeability attributed to their silicon content and
are heat-treatable, allowing for modification of mechanical properties. The AA6082 alloy …

The work aims at investigating the effects of the addition of Al 2 O 3 nanoparticle as an
enhancer on the mechanical characteristics of AA6082-T6 Metal Matrix Nano Composites …

The simultaneous improvement in strength and toughness through cryogenic temperature
rolling observed in recent studies is of profound interest for designers in defence …