Investigation of rib's height effect on heat transfer and flow parameters of laminar water–Al2O3 nanofluid in a rib-microchannel
The laminar forced convection heat transfer of water–Al 2 O 3 nanofluids through a
horizontal rib-microchannel was studied. The middle section of the down wall of …
horizontal rib-microchannel was studied. The middle section of the down wall of …
Numerical simulation of heat transfer and turbulent flow of water nanofluids copper oxide in rectangular microchannel with semi-attached rib
OA Akbari, D Toghraie… - Advances in Mechanical …, 2016 - journals.sagepub.com
In this research, the effect of utilizing semi-attached rib on heat transfer and liquid turbulent
flow of nanofluid water–copper oxide in three-dimensional rectangular microchannel has …
flow of nanofluid water–copper oxide in three-dimensional rectangular microchannel has …
Micro-PIV study of flow and the formation of vortex in micro heat sinks with cavities and ribs
A hydrodynamics of deionized water flowing through the micro heat sinks with cavities and
ribs are investigated experimentally. The Reynolds number ranges from 70 to 320. Using …
ribs are investigated experimentally. The Reynolds number ranges from 70 to 320. Using …
Investigation on novel raceway pond with inclined paddle wheels through simulation and microalgae culture experiments
F Zeng, J Huang, C Meng, F Zhu, J Chen… - Bioprocess and biosystems …, 2016 - Springer
The open raceway ponds are nowadays the most used large-scale reactors for microalgae
culture. To avoid the stacking of microalgae, the paddle wheels are the most widely used to …
culture. To avoid the stacking of microalgae, the paddle wheels are the most widely used to …
Local characteristics of bubbly flow in rods assembly 3× 3
MA Vorobyev, ON Kashinsky - International Journal of Heat and Mass …, 2024 - Elsevier
This study focuses on the experimental investigation of local characteristics of upward
bubble flow in a 3× 3 square rod bundle assembly. The experiments were conducted at …
bubble flow in a 3× 3 square rod bundle assembly. The experiments were conducted at …
Heat transfer and flow characteristics of forced convection in PDMS microchannel heat sink
Recently, microfluidic devices are being widely used in various heat transfer applications
and, thermal management in microchannels is a challenging issue. As a solution, different …
and, thermal management in microchannels is a challenging issue. As a solution, different …
Casson fluid flow in a microchannel containing a flow disturbing rib
This work numerically studies the flow of a Casson liquid over a flow-disturbing rib in a
rectangular μ-channel. The aim is to investigate, using a previously validated CFD code, the …
rectangular μ-channel. The aim is to investigate, using a previously validated CFD code, the …
Analysis of reattachment length dynamics in cavities
P Vilkinis, N Pedišius - Experimental Thermal and Fluid Science, 2020 - Elsevier
Recirculation zone dynamics in a cavity located in the bottom wall of a water channel with
height h= 0.3 mm and width b= 0.9 mm are investigated experimentally and numerically. A …
height h= 0.3 mm and width b= 0.9 mm are investigated experimentally and numerically. A …
Numerical analysis of fluid flow and heat transfer of flow between parallel plates having rectangular shape micromixer
In this study, heat transfer and fluid flow of de-ionized water in two-dimensional parallel
plates microchannel with and without micromixers have been investigated for various …
plates microchannel with and without micromixers have been investigated for various …
[PDF][PDF] Influence of slim obstacle geometry on the flow and heat transfer in microchannels
M Kmiotek, A Kucaba-Piętal - Bulletin of the Polish Academy of …, 2018 - psjd.icm.edu.pl
This paper presents a computational study on hydrodynamic and heat transfer
characteristics of the laminar flow inside a rectangular 2D microchannel of height H, which …
characteristics of the laminar flow inside a rectangular 2D microchannel of height H, which …