The processing, structure and properties (mechanical and functional) of directionally
solidified eutectic ceramic oxides are reviewed with particular attention to the developments …

In this study, ZrO 2 is introduced in a new form to reduce sintering and enhance the cyclic
stability of CaO-based sorbents. Such a material has potential for high-temperature CO 2 …

The relationship between microstructure and mechanical properties was studied in Al2O3–
ZrO2 eutectic rods. The material, produced by directional solidification using the laser …

Rods of 1–2mm diameter of Al2O3/Y3Al5O12/ZrO2 in the ternary eutectic composition
(65mol% Al2O3, 19mol% ZrO2, 16mol% Y2O3) were grown by the laser-heated floating …

The effect of Y2O3 content on the flexure strength of melt‐grown Al2O3–ZrO2 eutectics was
studied in a temperature range of 25°–1427° C. The processing conditions were carefully …

CaO is an attractive CO2 acceptor, due to its good kinetics and high capture capacity, even
under low CO2 concentration conditions. The major problem associated with CaO acceptors …

Eutectic composites of lamellar ZrO2–CaO and ZrO2–NiO and fibrous Al2O3–ZrO2, Al2O3–
ZrO2 (Y2O3), ZrO2–MgO and CaF2–MgO wide gap materials have been grown from the …

The effect of the microstructure on the mechanical properties of Al2O3–ZrO2 (Y2O3) eutectic
ceramic oxides was studied. Rods processed by the laser-heated floating zone method with …

Al2O3-Er3Al5O12 and Al2O3-Er3Al5O12-ZrO2 eutectic ceramic rods were directionally
solidified using the laser floating zone technique at several growth rates. Binary eutectic …

In this work, we have developed and characterized a ceramic composite based on a core of
directionally solidified calcium zirconate-calcium stabilized zirconia (CZO-CSZ) eutectic …