Several types of reduced activation ferritic/martensitic (RAFM) steel have been developed
over the past 30 years in China, Europe, India, Japan, Russia and the USA for application in …

In the context of carbon peak and carbon neutrality, the use of clean energy has become the
focus of attention. Hydrogen energy as the most potential secondary energy has a very …

DEMO is the name for the first stage prototype fusion reactor considered to be the next step
after ITER towards realizing fusion. For the realization of fusion energy especially, materials …

Yttrium oxide thin films were prepared by reactive magnetron sputtering in different
deposition condition with various oxygen flow rates. The annealing influence on the yttrium …

Tritium (T) distributions in yttrium (Y) and cobalt (Co) doped barium-zirconates (BaZrO 3)
were visualized by imaging plate (IP) technique using HT gas (T/H= 10− 4,∼ 1.3 kPa) under …

Suppression of tritium permeation through structural materials is essential in order to
mitigate fuel loss and radioactivity concerns. Ceramic coatings have been investigated for …

Material issues pose a significant challenge for the design of future fusion reactors. From a
historic point of view, the material mix used for the first wall of a fusion reactor has …

Material issues pose a significant challenge for future fusion reactors like DEMO. When
using materials in a fusion environment a highly integrated approach is required. Damage …

In this work, an Al 2 O 3/Cr 2 O 3 composite film on 316L stainless steel was prepared by
metal-organic chemical vapor deposition (MOCVD). The template effect of α-Cr 2 O 3 …

Cr 2 O 3 film on structural material as hydrogen permeation barrier can be applied in many
areas such as hydrogen storage devices, vacuum solar receivers and fusion reactors. In this …