Friction-based welding processes are considered as very efficient solid-state metal joining
processes due to soundness of the welded joint with remarkably less energy consumption …

The status quo of aluminium-to-copper joining by friction stir welding (FSW) drastically
changed in recent years, as a result of the increased interest of the scientific community on …

Naval grade high strength low alloy (HSLA) steels can be easily welded by all types of
fusion welding processes. However, fusion welding of these steels leads to the problems …

In this investigation the effect of friction stir welding pin geometry on the microstructure and
mechanical properties of AZ31B magnesium alloy joints is studied. The considered pin …

The effects of different pin features and dimensions of scrolled shoulder bobbin friction stir
welding were tested for welding marine grade aluminium, Al6082-T6. Welds were created in …

Microstructure and the corrosion behaviour of friction stir weld region in an aluminium
AA5083/AA7023 dissimilar joint was studied using SEM/EDS, potentiodynamic polarization …

The friction stir welding (FSW) was employed for joining 5 mm thick plates of high strength
low alloy steel (HSLA) of grade DMR249A in the development of light weight ship building …

Friction stir welding is a promising method for joining dissimilar metals. The transportation
industries are increasingly focussing on enhancing the fuel efficiency of vehicles because of …

A study of diffusion wear mechanism in 1.2344 X40CrMoV5-1 steel FSW tool has been
carried out from the standpoint of tribological layer generation and interaction with the tool׳ s …

Abstract A heat-treatable (AA 6082) and a non-heat treatable (AA 5083) aluminium alloys
were friction stir lap welded to copper using the same welding parameters. Macro and …