High-Temperature Tribology of Selective Laser-Melted Titanium Alloys: Role of Adhesive Wear
Abstract Titanium alloys (Ti6Al4V) are emerging materials used in many engineering
applications, especially aerospace, due to their strength-to-weight ratio, corrosion …
applications, especially aerospace, due to their strength-to-weight ratio, corrosion …
Enhancement of mechanical and tribological performance of Ti–6Al–4V alloy by laser surface alloying with Inconel 625 and SiC precursor materials
HR Cheng, KH Shin, HS Kim - Friction, 2024 - Springer
This study focused on producing metal matrix composite (MMC) coatings on Ti–6Al–4V alloy
through laser surface alloying using a novel combination of Inconel 625 and SiC precursor …
through laser surface alloying using a novel combination of Inconel 625 and SiC precursor …
Effect of temperature on sliding wear behavior of Ti-6Al-4V alloy processed by powder bed fusion additive manufacturing techniques
H Li, ZW Chen, M Ramezani - Journal of Materials Engineering and …, 2022 - Springer
Abstract Ti-6Al-4V is suitable for powder bed fusion additive manufacturing processes;
however, until now, limited studies are conducted to investigate the high temperature …
however, until now, limited studies are conducted to investigate the high temperature …
[HTML][HTML] Effect of Ball Burnishing on Fretting at Elevated Temperatures
S Swirad, P Pawlus - Materials, 2024 - mdpi.com
The influence of ball burnishing on friction and wear at elevated temperatures under fretting
conditions has not yet been reported. Fretting experiments were conducted using the …
conditions has not yet been reported. Fretting experiments were conducted using the …
Effect of Frictional Heating on Mechanically Mixed Layers during Dry Sliding Contact of Ti-6Al-4V Alloys at High Temperature in Vacuum Condition
Ti-6Al-4V (an α+ β titanium alloy) pins were slid against the SS316L disc in a pin-on-disc
apparatus at different temperatures under vacuum and ambient conditions. Tribological …
apparatus at different temperatures under vacuum and ambient conditions. Tribological …
Underlying Mechanisms Controlling Wear of Ti6Al4V-SS316L Tribo-pair at varying Sliding Speed and Contact Area in Vacuum
In tribo-systems, tribological behavior is influenced by a combination of several
mechanisms. Among them, plastic deformation mechanisms (PDMs) and tribo-chemical …
mechanisms. Among them, plastic deformation mechanisms (PDMs) and tribo-chemical …
Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys
Due to the relatively low strength and poor wear resistance of unalloyed titanium and its
good mechanical properties, corrosion resistance, and biocompatibility. Ti6Al4V has been …
good mechanical properties, corrosion resistance, and biocompatibility. Ti6Al4V has been …
Magnesium alloys for biomedical applications: Scope and opportunities
G Khajuria, V Gupta - Magnesium Alloys for Biomedical …, 2024 - taylorfrancis.com
Among various biomaterials, magnesium alloys are widely used in hard tissue engineering
applications, besides stainless steel, Co-based alloys, titanium alloys, etc. Mg alloys have …
applications, besides stainless steel, Co-based alloys, titanium alloys, etc. Mg alloys have …
Influence of Temperature and Applied Load on Adhesion and Abrasion Wear Characteristics of Ti6Al4V Alloy
Over the last decade, research on high-temperature tribological characteristics of Ti6Al4V
alloy has been gathered significant interest due to their sustainable properties in high …
alloy has been gathered significant interest due to their sustainable properties in high …
MORPHOLOGY OF WEAR DEBRIS DURING DRY SLIDING OF Ti6Al4V/TiC COMPOSITE AT ELEVATED TEMPERATURES IN VACUUM CONDITIONS
A high temperature-dependent wear setup was employed to examine the Ti-6Al-4V (an α+ β
titanium alloy) tribological properties under vacuum environments. The components of Ti-6Al …
titanium alloy) tribological properties under vacuum environments. The components of Ti-6Al …