Abstract Electron Beam Melting (EBM) and Selective Laser Melting (SLM) are two of the
most developed powder bed fusion based additive manufacturing processes. In this paper …

Synchrotron X-ray tomography was used to monitor damage evolution in three dimensions
during in situ Low Cycle Fatigue (LCF) tests at high temperature (250° C) for an industrial …

Abstract Lost Foam Casting (LFC) process is replacing the conventional gravity Die Casting
(DC) process in automotive industry for the purpose of geometry optimization, cost reduction …

In this article, mechanical and low-cycle fatigue (LCF) properties of piston aluminum alloys
were characterized. In addition, the effect of the reinforcement including nano-clay-particles …

Porosity is a major issue in solidification processing of metallic materials. In this work, wedge
die casting experiments were designed to investigate the effect of cooling rate on …

In order to study the role of Fe content on the damage mechanisms of Al–Si–Cu alloy on a
microstructural level, a Digital Image Correlation (DIC) method has been developed and …

Two X-ray computed tomography (CT) datasets have been acquired for a cold-sprayed
titanium sample before and after heat treatment. The datasets were collected with a beam …

The aim of this work is to analyse the strain field heterogeneity in an aluminium alloy
subjected to low‐cycle fatigue at high temperature. In the cylinder heads produced by a lost …

Tensile tests with 3D in-situ observation were performed using X-ray tomography on a
solution heat treated Lost Foam Cast A319 alloy. In-situ tensile testing allowed crack …

This work investigates the effect of cyclic loading upon periodic elasto-plastic porous
materials. The aim is to understand the evolution of the underlying microstructure, described …